PNEUMATIC RATCHET HIRE

Pneumatic Spader Hammer hire

Sizes available

7kg

13.5kg

18kg

27kg

41kg

Atlas copco hire

Sizes available

7kg

9kg

13.5kg

18kg

27kg

41kg

Features:

OFD3 technology: Faster pumping

Application

Compression

Free air delivery - lt per sec	88
Nominal working pressure - kPa	700

Drivetrain

Engine Make-Model	KUBOTA or DEUTZ diesel
Net engine power SAE Rated - kW	0
Fuel Type	Diesel

Features:

2HP Direct Drive
High Durablity
Large anti-vibration foot stabilizer
Half-enclosed cover for ventilation
24L metal body tank
Pressure gauge for easy monitoring
Trade quality design and engineering

Applications:

Suitable for air ratchets and light tools
Suitable for blow gun and cleaning
Suitable for filling tyres and other items with air
Suitable for air nailing (fixing gun)
Air Brushing

Specifications:

Tank: 24L
Power: 2HP
Voltage: 230V/50Hz
Tank capacity: 24L
Rated Speed: 1850RPM
Current: 5.5A
Pump displacement: 150L/min
Max Pressure: 800kPa / 8 Bar
Outlet: 1x 1/4"

Specifications:

Size: 10.2mm
Weight: 1.60kg
Average Air Consumption: 3.0 CFM
Maximum Air Consumption: 8 CFM

Ideal for domestic & commercial spray painting, roof restoration and low range water proof products.

What is an airless sprayer?

Airless sprayers in basic terms are just simple pumps designed to draw paint from a container and spray paint under pressure through a small orifice know as an airless spray tip. Over spray is limited because no air is introduced at the tip like with conventional air spray guns, the effect is 100% fluid transfer onto the surface being sprayed.

Why use airless sprayers?
Airless sprayers are widely used in new construction and maintenance of both domestic & commercial properties that include applications such as internal/external walls, ceilings and roof's. Airless sprayers in general are a very fast and efficient method of applying paint to large and small areas with minimal overspray.

How much faster is an airless sprayer?
To say how much faster an airless sprayer is over conventional methods of painting is impossible, but to give you a sample of the speed - if you can imagine painting a ceiling in a bedroom approximately 4m x 4m with say a decorative cornice, two coats with an airless sprayer would be completed in under five minutes - try to roll the ceiling and brush the cornice in that time! Painting four panel colonial style doors can take less than one minute per coat per side and a 120 square metre roof can be coated once in about 1 hour. Check out the video link below to see an airless sprayer in action.

http://www.airless.com.au/Movies/Atomex%20GM-20E.wmv

http://www.airless.com.au/Movies/Atomex%20GM-60E.wmv

Can all paints be sprayed using an airless sprayer?
Almost all coatings can be sprayed with some form of airless sprayer. Coatings such as texture will require a more specialised airless sprayer, but in general paints such as water based acrylic, oil based enamel, water based enamels, lacquers and roofing membranes are amongst the most common. Some paint products that are very heavy in solids such as epoxy may require thinning, heating or the introduction of air at the nozzle to be sprayed. As a suggestion before you choose to buy the latest in "Hi-Tech" space age coatings developed by NASA in conjunction with German scientists living in Sweden, that you actually check to see if the coating can be sprayed. In many cases paint manufacturers make products that are difficult if not impossible to spray unless you outlay tens of thousands of dollars in specialised spray equipment.

Does an airless sprayer require maintenance?
Airless sprayers require constant maintenance, they must be cleaned after use including the filters. Components in the airless sprayer will also wear due to the abrasive nature of paint, once an airless sprayer is purchased you will have to expect to spend money at some point in time repairing and maintaining the machine. People who buy airless sprayers thinking that the purchase cost of the unit is the end, we have news for you - It's just the beginning, keep your machine clean and fix problems early, this will reduce the chance of tears dripping off your face onto the invoice that you have just been handed by your repair agent.

Airless sprayers in summary?

Airless sprayers in general are not cheap, they require maintenance and will cost money, but the overall cost of owning an airless sprayer is nothing compared to the profit that an airless sprayer will make, not only in production but in time saved.

Specifications:

Stroke Length - 28.5mm
Weight - 2.66kg
Avg Air Consumption - 7cfm

Flexible loading height 800mm - 1600mm
Lock-in tabs for securing to Trailer/Truck
Anti-Slip serrated Slat Design

Ideal For Cars
Powerful 2200W motor
230mm burst resistant safety guard provides maximum user protection
Designed for professional Tradespeople it is ideal for a variety of cutting tasks making it the most versatile and useful tool you will ever own!
Powerful 1250W motor
Trigger switch
Adjustable belt drive
Ergonomic soft grip handle
Tungsten Carbide teeth blades
The handheld saw features two forward-facing blades that move simultaneously in an elliptical motion, instead of the spinning circular blade that is at the business end of a traditional saw. The AS170 offers levels of accuracy and control that are unique for a masonry power tool. In fact, it's the only power tool that can precisely cut deep, square corners, allowing contractors to remove single bricks with surgical precision without damaging the surrounding wall. In contrast, the AS170 performs a hammering and cutting action that lets it glide into brick or mortar cleanly and deeply, with precise stops and starts that make square cuts possible. The saw can cut directly into flush walls without stitch drilling, and it is the only small handheld saw that goes as deep as 120 mm when outfitted with the right blade.

Renovation, Restoration and RepairThe Arbortech AS170 Brick + Mortar Saw is an ideal tool for both trade professionals and DIY enthusiasts, as it covers a wide range of renovation, restoration and repair work:
Housing repairs and re-pointing
Extensions and additions
Renovations and alterations
Chimney repair & restoration
Some of the ideal applications for the AS170:
Toothing brickwork for extensions.
Tuckpointing.
Fast removal of in-built objects such as anchors, wall plates, joists, trusses, frames, sills, beams, lintels, wall units and steps.
Expansion joints and wall section replacement.
Removal of in-built furniture, plumbing and vanities.
Cutting of archways and windows.
Specifications:

Cutting depth/width120mm (43/4")/6.5mm (1/4"), depending on blade
weight, with cutting blades4.3kg (9.5lb) Dimensions without blades450 mm (17 7/10") L, 75 mm (3") W, 240 mm (9 9/20") H No load speed 5100 rpm Electrical rating, nominal230-240 VAC, 50Hz,
Dust extraction vacuum hose interfaceSuits vacuum hose with inner diameter of 25mm, 32mm, 37mm or outer hose diameter 32mm Belt tension1 mm (1/16") maximum mid-span deflection with 25 N (2.5 kg) (5lb) deflection force Blade mount bolt torque 16 Nm (1.6 kg -m), (11.5ft-lb)
The AS170 offers extreme levels of precision, accuracy and control allowing the tool to be used for a wide range of applications from heritage masonry work to electrical installations.
Tuckpointing
Brick Removal
Restoration
Renovation
Repairing Brick Walls
Lintel Repairs
Cutting Cement Block
Historical Restoration
House Repairs & Repointing
Toothing Brickwork
Chimney Repairs
Expansion Joints
Installations of Vents, Registers etc.
Electrical Outlets
Plumbing
What was before a time-consuming, dusty and inaccurate job can now be transformed into an easy, fast, virtually dust-free, precise and safe job with the Arbortech AS170, providing you with many important Benefits:
Cut Square: The AS170 cuts square openings with no over cutting. Surrounding brickwork can remain untouched, no bolstering or stitch drilling is required and job completion times can be reduced.
Cuts Deep: The AS170 is the only small handheld saw able to cut to a depth of 4 3/4".
Cuts Safe: The AS170 provides superior operator safety. The inherently safe cutting action prevents kickback and is easy to control.
Plunge Cuts: Use the AS170 to cut directly into flush walls without stitch drilling.
Cuts Dry / Low Dust: This unique cutting technology creates very little flydust protecting the operator and creating a cleaner work environment.
High Visibility and Precision Cutting: The forward facing blades allow clear visibility when cutting making the AS170 the ideal tool whenever accuracy and precision is required.
Includes:
1 x set General Purpose Blades
1 x set Plunge Blades
1 x spare belt
1 x dust boot
1 x heavy duty storage bag
AS170 cutting material guideBuilding Materials:Rock:Wood:Plastics:Bricks (up to 50Mpa)Soft Sandstone Hard WoodFoamm ortarNatural LimestoneChip or Ply woodPVCFibre Cement Soft to medium stone Dirty woodAcrylicFast BlockTree roots in the groundFibreglass

NO LOCK - IN CONTRACT !!!!
NO SWAP.
19 dollars FIXED PRICE per day
GAS CHARGE pay-per-use

ALL TYPES OF GASES HIRE AVAILABLE IN C
Upper and lower blade guide adjustment prevents twisting and helps extend blade life
Cutting depth of 125mm and throat capacity of 245mm allows cutting of larger workpieces
Dual dust extraction ports: 100mm outlet to keep machine clean
Single Phase battery charger hire
Battery Power Jump Starter Charger Air Compressor hire
Gas not included.

Other features include a high strength cast alloy construction and dust extraction with collection bag.

Powerful 1010W motor with variable speed
75mm belt
Dust extraction with collection bag
High strength cast alloy construction

Powerful 370W induction motor
150x25mm grinding wheel with protective lense
50x686mm sanding belt
Includes wheel dressing tool for easy upkeep
Built-in work light

Features
4-stroke engine.
Easy starting.
Clean exhaust emission and low fuel consumption.
Compact and light weight.
Mechanical decompression system for easy recoil pulling.
Slim body for comfartable handling.
Specifications
Displacement 24.5 mL
Fuel Tank 0.52 L
Maximum Air Volume 8.91 m³/min
The velocity of the wind 316 cu.ft/min
Without Blower Pipes 64.6 m/s
Overall Length 368 mm (14")
Net Weight 4.4 kg
Professional Bolt Cutter 900mm
Heat treated alloy jaws
Rated to cut HRC40
Fully adjustable jaws

Along with the Bull Floats we also offer Cement Mixers
carpet dryer hire
carpet fan hire

Features:
Strong links for reliability
2.5m lift
Specifications:
Gross Weight: 10.5kg
Net Weight: 10.2kg
Capacity: 1t
Lift Height: 2.5 mm
Package Size: 250.0 x 180.0 x 140.0 mm
Chainpull to Lift Full Load: 323 N
Max Load: 1 kg
Headroom(Hook to Hook)Hmin: 295

Cordless chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Husqvarna Petrol Chainsaw hire

Features:
Use on concrete, stone and masonry
Square corners
Narrow deep cutting up to 16 in. (40 cm)
Small openings
94 cc gas powered engine
Safe, no gyroscopic rotation
Specifications:

weight 21 lbs/9.6 kg (without bar and chain) Bar length
Up to 16" (40 cm)
Concrete & Utility Pipe Chain Saw

Deepest, Most Versatile Gas Powered Saw

Easy to start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. 16-inch (40cm) guidebars and the entire line of MAX, ProForce and PowerGrit series diamond chains. The 695XL is the highest horsepower ICS gas saw for frequent-use by general construction, utility contractors and concrete professionals.

Makita PC5000C 1400W Concrete Planer hire 125mm
Concrete edger hire
Easy to install/remove dust bag can be set in place simply by sliding over dust port
Electronic control allows for use of powerful 1,400W motor - Constant speed control -Soft start suppresses start-up reaction - Electronic current limiter protects motor from overload
LED power light to indicate anti-restart
Easy-to-operate large type trigger switch
Product Specifications
Wheel Size 125mm
Hole Diameter 22.23mm
Continuous Rating Input 1,400W
No Load Speed 10,000rpm
Overall Length 437mm
Net Weight 4.0kg
Power Supply Cord 5.0m

Standard Accessories
1 x Offset diamond wheel

Lock nut wrench
Dust bag assembly
Brush set
Hex wrench

Concrete Planer hire 125mm
Concrete edger hire
Easy to install/remove dust bag can be set in place simply by sliding over dust port
Electronic control allows for use of powerful 1

Floor Grinder with diamond segments for resurfacing concrete and asphalt surfaces.

The BS-270 floor grinder is designed for working horizontal surfaces grinding with a working width of 270mm. It is a sturdy and powerful machine, that can be used on a large number of surfaces to be scratch such as for:
Horizontal surface polishing

Concrete irregularities removal and grinding
Removal of resins and coating
Surafce polishing of granite, natural stone and concrete.
Removing glue
The motor for this machine is designed for a long service life. Unusual noises, functional faults or breakdowns indicate damage to the motor. Application:
Aggressive to fine milling
Removal of coatings
Removal of paint and adhesive residues on concrete floors
Features:
2.2kW motor
Clamping lever
Dusthood with rubber seal
Rubber wheels 50 x 160mm
Connection industrial extractor
Emergency stop switch
Grip for transport
Flap gate
Specifications:

Power2,2 kW, 1 x 230 V, 14.5 A
Grinding Width
270 mm
Noise Level 1m
80 dB(A)
Vibrations
1.95m/s2Machine length 860mm / 35 Inch
Machine Width
470mm / 19 Inch
Machine Height1000mm / 40 Inch
Machine weight 46 kg including tools
Concrete polishing machine HIRE
Concrete polisher hire
Diamond grinder hire
Diamond inserts 120 dollars each.
Diamond CHARGE : pay-per-use

Concrete grinding machine hire

Floor Grinder / Edge Grinder FGE 27
Increased productivity and grinding performance due to single-head grinding principle
Easy handling thanks to ergonomic control elements, fixed speed as well as low noise and vibration levels
Fatigue-proof working and reduction of side forces because of outstanding machine balance
Maximum durability and load capacity due to very robust construction
Impressive mobility as well as trouble-free transportation thanks to detachable machine parts
Timesaving patented tool quick fixing system
Dust-free operation because of floating cover in combination with reliable dust collection system

The machine handles everything from floor preparation and grinding to fine polishing with ease. In addition, the HTC 420 can remove tough coatings like adhesive, screed and paint.
A light and handy all-round machine for concrete, natural stone, terrazzo and wood
Frequency controlled
Ergonomically designed
The machine can be used for coarse grinding, preparation, maintenance and polishing
Collapsible for easier transport
Diamond CHARGE : pay-per-use
"

Floor Grinder with diamond segments for resurfacing concrete and asphalt surfaces.

The grinder is designed for working horizontal surfaces. It is a sturdy and powerful machine, that can be used on a large number of surfaces to be scratch such as for:
Horizontal surface polishing

Concrete irregularities removal and grinding
Removal of resins and coating
Surafce polishing of granite, natural stone and concrete.
Removing glue
The motor for this machine is designed for a long service life. Unusual noises, functional faults or breakdowns indicate damage to the motor. Application:
Aggressive to fine milling
Removal of coatings
Removal of paint and adhesive residues on concrete floors

Technical Details
Max. grinding width
450 mm
Grinding disc width
3 x 180 mm
Grinding disc speed
480 1/min
Grinding pressure
63 kg
Design
Grinding head
1
Belt Drive

Detachable machine parts

Drive
Drive / motor
Electric
Type
Busck
Power
1.5 KW
Voltage / Frequency
230 V / 50 Hz
Current
8.3 A
Current Optional
17.5 A | 8.3 A
Dimensions & Weight
Length
705 mm
Width
490 mm
Height
1350 mm
Weight
95 kg
Weight grinding head
68 kg
"

The power trowel is a very light tool of construction equipment. Itâ€™s also known by the name â€œpower floatâ€, â€œhelicopterâ€, â€œtrowel machineâ€ or â€œwhirlybirdâ€.
It is a finishing machine that is created to put a hard skin onto the surface of the concrete. The outcome will be a smooth and reasonable dust free floor.
It is absolutely necessary to know the right moment for working with the power trowel.
Too early, when the concrete will not be hard enough to support the weight of the machine (even light) and the technician. Too late the concrete has become too hard, and the result is not satisfying â€“ not smooth enough and still too dusty.

power float hire
helicopter hire
trowel machine hireor
whirlybird hire

Concrete line pumping

Travel (one hour minimum) 179

6 dollars per cubic metre

169 dollars per hour (minimum 4 hours per job)

Price
Cement mixer hire

Husqvarna K 970

Adjustment to openings
Asphalt
Blocks, curbstones and pavers
Burying of cables
Floors and walls
Pipes
Engine specifications
Cylinder displacement 93,6 cmÂ³
Power output 4,8 kW
Vibration & noise data
Vibrations front handle 3,9/3,4 m/sÂ²
Vibrations rear handle 4,2/4,8 m/sÂ²
Sound pressure level at operators ear 104 dB(A)
Sound power level, guaranteed (LWA) 115 dB(A)
Cutting equipment
Blade diameter 350/400 mm
Max cutting depth 125/145 mm
Combined bushing diameter 20/25,4 mm
Overall dimensions
Weight (excl. cutting equipment) 10,9/11,9 kg

Demolition saw hire
Demo saw hire
Concrete cutter hire
Wet saw hire

Diamond blade charge according to the use.

Robust, reliable, light and powerful - the K 970 power cutter is ready to perform when you are. The ultimate choice when you need an all-round cutter performing in the toughest conditions, withstanding climate and fuel variations. Suitable for road works when used with the corresponding KV 970 trolley. The trolley also means you can fully concentrate on the cutting job.

Electric demo saw hire
Electric demolition saw hire
Electric concrete cutter hire
Diamond blade charge according to the use.

Best Used on:
It is intended for cutting masonry, stone, concrete, reinforced concrete and similar materials.
Benefits:
Wet and Dry Usage
Built in guide rollers, overload protection and splash guard
This machine is equipped with two handles and a blade guard. The motor has overload and overheat protection. It has an integrated water feed system as required for diamond cutting and has a portable residual current device (PRCD) for electrical safety.
Handles designed for optimal control
Externally accessible brushes
Tool-free blade guard angle adjustment
Water feed system with fine adjustable flow and quick release coupling
Detachable guide rollers for square cuts
Only use either segmented or continuous rim diamond blades.
If the diamond blades are segmented, the maximum allowable peripheral gap between segments is 10mm and must be with a negative rake angle.
Only diamond blades of 355mm (14â€) or less may be used.
Blade thickness must be at least 2.0mm and no greater than 6.35mm
Specifications:
Power Input: 220-240V: 2800W
Rated speed: 4500/min
Blade Diameter 355mm (14")
Arbor 20mm or 25.4 (1 in.)
Max. Cutting Depth 125mm (5")
Weight 7.9kg (17 Lbs) (8.3kg (18 Lbs) with guide rollers)
Dimensions (L x W x H): 720 x 310 x 290mm

The scarifier is a 200mm machine designed to be rental-tough. This machine is not a toy - plenty of weight gives excellent control and ease-of-use. (Approx 100kg)
Quick-change drum design and spare drum assemblies. Six-shaft drum assembly holds more cutters per loading for added grinding action, a more uniform surface texture and fewer drum changes.
You can choose from a variety of accessories and cutters to achieve the profile, depth and speed you need for each job. Â•
Tungsten carbide cutters Â•
Diamond grooving heads Â•
Hardened-steel cutters Â•
Power source directly over drum to eliminate vibration and maximise surface contact Â•
Ideal for sidewalk repair, coating and traffic line removal, floor preparation and creating nonslip surfaces Â•

Production: 35-50 sqm/hr at 2mm depth

The screed is ideal for smoothing and levelling concrete after it has been placed on a surface. Suitable for professionals and the home handyman in concreting and landscaping applications

CONCRETE JOINT SOFT CUTTER
Diamond blade charge according to the use.
Soff Cutting allow's for the earlier cutting of concrete slabs to prevent random cracking. Used as part of major roadway construction as well as pathways and driveways.

Husqvarna Soff Cut 150
Husqvarna Soff-Cut 150

The Husqvarna Soff-Cut 150 petrol saw is designed for residential and light commercial applications. The lightest petrol saw in the Soff-Cut range, the 150 is designed for ease of use and convenience. Features include a patented low noise blade enclosure which allows the unit to be used in residential areas with minimal disruption. In addition, the low-dust blade block system allows the saw to cut dry, and it controls the debris for easy cleanup.

OTHER FEATURES
Patented low-noise and low-dust blade block
enclosure.
4.5 hp engine with cyclone air filter.
Mechanical blade depth control.
Non-marking and non-stick polyurethane wheels.
Retractable front guide system.
High-strength single piece frame.
Folding handle.
Centre lifting handle.
Roll cage frame.
Patented safety arbor.
Patented sawing method.
Easy-pull start engine.
Supplied standard with skid plate and 150 mm
2000 series blade.

TECHNICAL DATA
Engine
Motor manufacturer Robin
Motor spec Robin petrol
Max output 3,3 kW / 4,5 hp
Cutting equipment
Diamond blade, max 150 mm
Max cutting depth 30 mm
Dimensions
Weight 45 kg

Features:
Steel Vibrator Head with Steel Nose Cap
Flexible Shaft Support Spring
Adjustable Handle
Honda 4 - stroke 35cc Motor
Carry Strap
Convenient On/Off Switch & Throttle Control
Specifications:
Engine: 4 Stroke Honda 35CC
35% More Power
Centrifugal Clutch
Type: Hard Nose
Flexshaft Length: 545mm
Vibrator Head Diameter: 44mm
Vibrator Head Length: 390mm
Oprating Weight: 13kg
Shaft Inner Core Diameter: 7.5mm
Shaft Outer Casing Diameter: 28mm
Amplitude in Air: 2.8mm
Fuel Type: Petrol
Max Rated Power: 1.5hp

Applications:
Hire and Rental businesses
Construction
Concrete contractors
Councils / Shires
Builders and tradesmen
Agricultural
Retaining walls
Pilers and underground carparks
45mm poker head
6m heavy duty flexible drive shaft

Battery charger & 2 batteries included
Features:
Electric brake quickly slows the wheel rotation to a complete stop after the switch has been disengaged
Soft start allows slower initial disc RPM before reaching full speed, to reduce start up shock, ensuring user safety
Automatic torque drive automatically reduces RPM to increase torque when in tougher conditions
Kickback detection shuts down the tool to protect the user if the rotation speed suddenly slows down
Anti-restart function; if battery is inserted whilst the switch is engaged the tool will not start. Switch must be released and engaged again
XPT eXtreme Protection Technology enhances dust and drip resistant performance protecting electrical components
BL Brushless Motor provides the tool with more power and longer runtimes
Specifications:
Voltage: 18V
Wheel size: 125mm
Bore: 22.23mm
No load speed: 8500rpm
Switch type: Paddle
Length: 362mm
Weight: 2.6kg

3 air volume setting
Cordless blower hire

Features:
Powered by two 18V Li-Ion batteries
3 speed adjustable nozzle
Variable speed dial & switch with lock-on.
Battery capacity warning lamp: One lamp for each individual battery
One-touch locator allows for easy locator installation/removal with single action.
Specifications:
Voltage: 2 x 18V
Max Air volume: 13.4m3/min
Max Air speed: 139km/h
Continuous run time using same full batteries: 35-150mins
Weight: 3.5kg

Features:
Compact and light weight design
360? rotating sealant holder - Even in caulking hard to reach places, you can avoid awkward working postures by simply rotating sealant holder so that the angle of the cartridge nozzle fits over the gap to caulk
Variable speed control by dial and trigger switch for maximum control of sealant flow rate:
Speed control dial - Enables user to set maximum pushing speed for optimum sealant flow rate to match the material of workpiece or the width of the gap to caulk
Variable speed trigger switch - Allows for fine adjustment of pushing speed for controlled sealant flow rate at startup and around the corner
LED job light with pre-glow and afterglow functions
Excellent work efficiency
Overload indication lamp; single LED light indicates how heavily the machine is loaded for preventing breakage of the sealant cartridge as follows:
Blinking: The machine is nearly overloaded
Solid: The machine is overloaded; the overload circuit will shut off the power
Rubberised soft grip provides comfortable grip and better control
Anti-drip function stops excess sealant from oozing out upon release of the switch trigger by removing the residual pressure inside of sealant cartridge/holder
Piston for bulk sealant can also be used as a suction plunger to pump up sealant into the 600ml size holder from bulk container
Specifications:
Cartridge Size: 600ml
Max Pushing Force: -5,000N
No Load speed: 0-28mm/sec
Compatible Sealant:
Size: 51.0mm x 355mm
Type: Cartridge, Sausage Pack, Bulk Sealant
Trigger Lock: Yes
Dimensions(LxWxH): 659mm x 108mm x 281mm
Weight: 2.7kg

Features:
Powered by two 18V Li-Ion batteries
As powerful as a corded circular saw
45Â° stopper; bevel angle range can be changed from 0-45Â° to 0-50Â°
Blower function blows sawdust off the cutting line ahead for a better view
Lock-off button conveniently located on the handle for ease of use
Well balanced design for easy operation
Rear dust exhaust
Soft grip with non slip elastomer grip for more comfort and control
Electric brake
Soft start
Specifications:
Blade Diameter: 190mm
Max Cutting Capacities
45Â°: 49mm
0Â°: 68.5mm
No Load Speed: 4,800rpm
Length: 356mm
Voltage: 18V x 2
Weight: 4.7kg

Features:
Compact and lightweight design
All metal gear construction ensures high transmission durability
Single sleeve 13mm keyless chuck
The very latest in Makita Cordless technology with overload protection to both battery and tool
Specifications:
Voltage: 18V
Drilling capacities
Steel: 13mm
Wood: 38mm
No load speed
Hi: 0-1
Features:
Automatic Torque Drive automatically changes the cutting speed according to load condition for optimum operation (ie high speed rotation mode for light duties, high torque mode for heavy duties)
Double slide mechanism - 4 self lubricating linear ball bearings are used for smooth and precise cutting
Soft elastomer carrying grip provides sure but comfortable grip for easy job site portability.
Lightweight and compact - The double sliding mechanism makes it lighter and more compact, requiring less work space and allowing quick storing and easy transport to job-sites
Duel battery fuel gauge indicated in 3 stages
Soft start to minimize start-up shock and makes the tool start smoothly
Electric brake stops the blade gently but fast, allowing users to quickly resume operation
Dust bag provided for dust collecting

Specifications:
Voltage: 18V x 2
Max cutting capacity:
0Âº: 52mm x 300mm
45Âº: 52mm x 212mm
90Âº: 52mm x 163mm
Blade size: 190mm
No load speed: 5700rpm
Dimensions (L x W x H): 655mm x 430mm x 445mm
Weight: 13.3kg
Mitre stand for 5 dollars per day.

Protective bumpers for increased durability.
Two settings (high 1 "
Features:
All metal gear construction - Extra-high transmission durability
Belt clip and bit holder
Battery fuel gauge
Single sleeve key less chuck allows for easy bit installation/removal by one hand
Torque setting ring - Wider torque range of 1-10 NM in clutch mode allows for versatile applications
Specifications:
Capacity:

Steel: 13mm
Wood: 76mm
Masonry: 16mm
Impacts per minute:

High: 0-30,000ipm
Low: 0-6,000ipm
No load speed:

High: 0-2,000rpm
Low: 0-400rpm
Max. fastening torque:
Hard: 58NM
Soft: 58NM
Dimension (L x W x H): 225mm x 79mm x 259mm
Weight: 2.3kg
"
Impact driver hire.

Features:
Aluminium hammer case â€“ hammer casing has been designed to be light weight and robust
One touch installation â€“ driving shank has been designed so that the collar does not have to be pulled back when installing a new bit
Makita wrench hire.

Features:
Maximum tightening torque of 280Nm
Phosphorescent bumper
12.7mm (1/2) square drive
LED job light with pre-glow and afterglow functions: On pulling switch trigger
Makita 36V whipper snipper hire.
Features:
Power by two 18V Li-ion batteries
Features:
Compact and lightweight design
Rubberised soft grip
Base plate of stainless steel
Large lock-off lever
Nibbler 1.6mm 18v

Makita oil impact driver hire
Noiseless impact driver hire
Silent impact driver hire

The Makita DTS141 is the newest expansion to the ever-growing line of Brushless DC motor tools. This Impact Driver provides a lower noise alternative of only 77dB, compared to the other Impact Drivers in Makita's and the general markets range. With 3 stage impact power, one touch bit installation and XPT (eXtreme Protection Technology), the DTS141 is quickly becoming a market leader.
Features:
Powerful Brushless DC motor (BLDC)
Extra compact design with a short overall length of 136mm
LED job light with pre-glow function
Variable speed control by trigger
Low noise level of 77dB compared to other Mobile Impact Drivers
One touch bit installation
'T' mode: tightening mode for self driling screws
Electronic 3 stage impact power selection
Battery fuel gauge
Specifications:
Voltage: 18V
Drive Shank: 6.35mm (1/4") Hex
Impact Rate:
Hard: 0-2,700ipm
Medium: 0-2,100ipm
Soft: 0-1,400ipm
Max Fastening Torque: 40Nm
No Load Speed:
Hard: 0-2,700rpm
Medium: 0-2,100rpm
Soft: 0-1,000rpm
Capacity:
Coarse Thread: 22-125mm
Machine Screws: M4-M8
Standard Bolt: M5-M8
Overall Length: 136mm
Weight 1.5kg

Product Specifications:
Shiplapping: 9mm
Planing width: 82mm
Planing depth: 0-2.0mm
No load speed: 14
Two switch levers are available with various speed control; Trigger switch and Paddle switch
LED job light
Electric brake
Rubberised soft grip
Toolless blade clamp: blade can be set in place with a single insert and removed simply by turning the blade clamp
Blade clamp compatible with Recipro blades
Low vibration at only 7.0m/sÂ²
Compatible with 4.0Ah battery (BL1840)
18V Mobile Recipro Saw hire

18 Volt Solution for Corded Power Demands
Two 18V LXT Lithium-Ion batteries deliver the power and run time for corded demands without leaving the 18V LXT platform
Makita-built motor delivers 0-1
Features:
Powered by both 18V Lithium ion batteries and 240V AC power
Light source is able to rotate 360 degrees to point in desired direction.
High light output 20 bright white LEDs producing 1
Diamond charge according to the use.
Features:
Universal wet diamond core drill with a wide drilling range for rig operated and hand-held drilling
High-performance, air-cooled motor
3-speed-gear with oil bath lubrication and overload clutch
Motor protection and soft start by means of the Intellitronic
Levelling assistance; by two integrated levels
Applications:
Hand-held and rig operated wet drilling in concrete, masonry and stone
Through-holes for cables, cable trays and pipes
Stitch drilling of through-holes in plumbing, and air conditioning installations
Ventilation openings

Core drill stand available for 40 dollars per day

Diamond charge according to the use.
Number of gears: 3
Drilling range: Rig-based wet: 82-600 mm
Max. drilling depth: 500 mm

Core Drill hire
TILER HIRE
ROTARY HOE HIRE
ROTOTILLER HIRE
The Rover Super Bronco Rear Tine Tiller has a 208cc Rover engine for a reliable performance. This easy to use machine features a wide 41cm (16") tilling width for larger jobs and 25cm (10") counter rotating tines to break new ground and maintain a garden of any size or soil type.
208cc Rover engine for a reliable performance
A durable gear drive wiith a cast-iron transmission
Counter Rotating Tines (CRT) that help break up new ground, great for areas with compact soil.
Model Number 21C-65M3333
Engine 208cc Rover engine
Handle Loop & bail for ease of use
Tilling Width 41cm (16")
Tines 25cm (10") counter rotating
Tine Shield 43cm (17")
Tyres 33cm (13")

Dehumidifiers are key tools for drying and restoring your environment after water damage caused by leaky plumbing or a flood.
A dehumidifier reduces the level of humidity in the air, usually for health or comfort reasons, or to eliminate musty odor. Large dehumidifiers are also used in commercial buildings such as indoor ice rinks to control the humidity level.

Delivery fee for small tools up to 100kg (within a 10km from Padstow).
39 dollars delivery.
39 dollars pick up.

Delivery fee for small tools up to 100kg (within a 15km from Padstow).
49 dollars delivery.
49 dollars pick up.

Delivery fee for small tools up to 100kg (within a 20km from Padstow).
59 dollars delivery.
59 dollars pick up.

Features:
Ergonomically designed handle with easy-to-operate slide switch adds comfort and control and reduces hand fatigue and pain even in long continuous operation.
Rubberised soft grip provides more comfort and control.
Electronic with:
-Variable speed control by dial.
-LED service llight that indicates when to replace carbon brush.
-Soft start for suppressing start-up reaction.
-Constant speed control.
Long size carbon brush for extended life.
High durability achieved by strengthening of key parts such as barrel or gears
Specifications:
Joules: 33.8
Overall length: 715mm
Net weight: 15.3kg
Power cord length: 5.0m
Impacts Per minute: 730-1
Features:
High impact performance due to 62 joules of impact energy and 1000 blows per minute
Very low vibration (only 8 m/s?) thanks to the decoupled handles and the vibration-reduced hammer mechanism - for a longer trigger time per day
Very long lifetime thanks to high-quality components made of aluminum and steel
Optimum handling: ergonomic handles with soft-grip and low centre of gravity for optimum handling
Anti-slip surface prevents the tool from falling over
This tool achieves an average material removal rate of 3.2 tons per hour (in accordance with EPTA Procedure 03/2008)
Makita Diamond Glass Cutter Hire.
Lightweight and compact
Rubberised soft grip
Water tank for easy water feeding
45Â° bevel cutting
Nickel plated base for rust prevention
Max. cutting capacity 1"
Makita CC300DZ Specifications:
Bevel Capacity 0-45 degrees
Blade Diameter 85mm
Max Cutting Capacities - at 0 degrees 25.5mm
Max Cutting Capacities - at 45 degrees 16.5mm
Net Weight 1.7kg
No Load Speed 1,400rpm
Overall Length 300mm
Tank Capacity 500mL
Voltage 10.8V
Includes:
85mm Diamond wheel
Hex wrench

2016 models DINGO and KANGA ready for work.
Price for mini loaders only.

ALL-ROUNDER
The All-Rounder is the latest evolution of the 950 and K9-3 models that revolutionised the mini digger industry. Improved hydraulic and engine technologies, combined with Dingoâ€™s innovation have led to increased hydraulic flow, greater ground speed and more digging power than ever before.
There is not much the All-Rounder cannot do. We proudly present
â€œThe best all-round mini digger in the worldâ€.
PERFORMANCE
Hydraulic Pumps 2 Pumps
Pump Sizes 11 & 3cc
Relief Pressure (Aux) 3200psi (206bar)
Hydraulic Output 47 L/m
Max Travel Speed 7km/h
Rated Lift Capacity
275kg WLL
550kg MLL
Wheel Motors 4
Aux Hydraulic Outlets 1

DIMENSIONS
A. Overall Width 850-1050mm
B. Overall Length 1565mm
C. Overall Height 1200mm
D. Max operating height 4in1 2080mm
E. Turning Raduis with 4in1 Bucket 1300mm
F. Angle of Departure 20Âº
G. Wheel Base 732mm
H. Ground Clearance 135-170mm
I. Dump Height Std Bucket 1240mm
J. Dump Height 4in1 Bucket 1750mm
K. Reach Fully Raised 4in1 Bucket 600mm
L. Height to Hinge Pin 1680mm
M. Machine width 4in1 bucket 1050mm
Hydraulic Reservoir Capacity 60L
Machine Mass 722kg approx. | 860kg approx.

4IN1 BUCKET HIRE. Removing any type of fill or grabbing and lifting landscape supplies like rocks, posts, cement bags, and much more.

Mini loader 159 dollars per day.

Postohole digger hire drive.
Mini loader 159 dollars per day.
DINGO DOZER BLADE HIRE. Fill in cut trenches after and laying pipes or irrigation.
Blades are extremely useful for filling long trenches; all you have to do is set the angle and drive from end to end. Blades are also great for pushing dirt, making drains and shifting snow.

Mini loader 159 dollars per day.
TRENCHER HIRE for drainage, irrigation and plumbing â€“ 110mm wide, up to 900mm deep.
Mini loader 159 dollars per day.

Specifications:
Power: 750W
Voltage: 220V ~ 50Hz
Max Flow: 300L/min
Max Head: 10m
Max Grain Size: 25mm
Outlet Diameter: 50mm
Submersible Depth: 5m from impeller centre
Max Liquid Temperature: 40Â°C

HILTI GUN HIRE
NAILS AVAILABLE FOR EXTRA CHARGE
Features
No battery to charge so no need for a charger
High fastening rate for high productivity and maximum efficiency
Magazine holds 40 nails: very fast when used for repetitive fastening
Wide range of nails: the right nails for fastening to a wide variety of materials
Drives 750 fasteners with a single gas can

Gyprock frame gun hire

1.8-3.3m 120kg Dual Purpose Aluminium Ladder

duct lift hire / manual lifter hire / platform lifter hire / winch lifter hire

Max Working Height
(m)
Min. Load Height
(m)
Width-stradle Min
(m)
Capacity Max
(kg)
3.5 0.15 0.75 350

Excavator hammer moil : 15 dollars

1.7 TONNES Tight access CATERPILLAR excavator hire 2016 MODEL
OVERVIEW
The CatÂ® 301.7D gives you a blend of power, control and stability to make your working day easier and more productive.
ENGINE
Engine Model Yanmar 3TNV76
Net Power 13.2 kW
Displacement 1116.0 cm3
Gross Power (ISO 14396) 17.9 kW
Rated Net Power @ 2,200 rpm (ISO 9249) 13.2 kW
WEIGHTS
Operating Weight 1728.0 kg
Operating Weight with Cab 1720.0 kg
Operating Weight with Cab and Extending Undercarriage 1845.0 kg
Operating Weight with Canopy 1610.0 kg
Operating Weight with Canopy and Extending Undercarriage 1735.0 kg
TRAVEL SYSTEM
Gradeability 30Â°/58%
Travel Speed 2.8 km/h/5.6 km/h (1.74 mph/3.48 mph)
HYDRAULIC SYSTEM
Operating Pressure - Equipment 200.0 bar
Operating Pressure - Travel 200.0 bar
Operating Pressure - Swing 125.0 bar
Auxiliary Circuits - Primary 30 L/min at 170 bar (8 gal/min at 2,465 psi)
Auxiliary Circuits - Secondary 17 L/min at 200 bar (4.5 gal/min at 2,900 psi)
Maximum Bucket Force 18.8 kN
Maximum Stick Force - Long Stick 9.8 kN
Maximum Stick Force - Standard Stick 11.2 kN
Pump Flow @ 2,200 rpm 6.4 L/min
BLADE
Width 990.0 mm
Height 230.0 mm
Dig Depth - Standard Blade 317.0 mm
Lift Height - Standard Blade 197.0 mm
SERVICE REFILL CAPACITIES
Fuel Tank Capacity 24.0 L
Hydraulic Tank Capacity 21.0 L
DIMENSIONS (APPROXIMATE) - STANDARD STICK
Boom Swing Angle (LH) 77Â°/64Â°
Boom Swing Angle (RH) 48.0 Degrees
Height 2290.0 mm
Length of Undercarriage (Extending) 1600.0 mm
Length of Undercarriage (Fixed) 1445.0 mm
Maximum Boom Offset (LH) 360.0 mm
Maximum Boom Offset (RH) 520.0 mm
Maximum Dig Height 3485.0 mm
Maximum Digging Depth 2200.0 mm
Maximum Dozer Dig Depth 320.0 mm
Maximum Dozer Lift Height 200.0 mm
Maximum Dump Height 2500.0 mm
Maximum Reach at Ground Level 3700.0 mm
Maximum Vertical Dig Depth 1430.0 mm
Tail Swing Radius 1170.0 mm
Transport Length (Arm Lowered) 3855.0 mm
Undercarriage Width (Extended) 1300.0 mm
Undercarriage Width (Retracted) 990.0 mm
Width 990.0 mm
DIMENSIONS (APPROXIMATE) - LONG STICK
Boom Swing Angle (LH) 77Â°/64Â°
Boom Swing Angle (RH) 48.0 Degrees
Height 2290.0 mm
Length of Undercarriage (Extending) 1600.0 mm
Length of Undercarriage (Fixed) 1445.0 mm
Maximum Boom Offset (LH) 360.0 mm
Maximum Boom Offset (RH) 520.0 mm
Maximum Dig Height 3595.0 mm
Maximum Digging Depth 2400.0 mm
Maximum Dozer Dig Depth 320.0 mm
Maximum Dozer Lift Height 200.0 mm
Maximum Dump Height 2610.0 mm
Maximum Reach at Ground Level 3895.0 mm
Maximum Vertical Dig Depth 1620.0 mm
Tail Swing Radius 1170.0 mm
Transport Length (Arm Lowered) 3855.0 mm
Undercarriage Width (Extended) 1300.0 mm
Undercarriage Width (Retracted) 990.0 mm
Width 990.0 mm
OPERATING SPECIFICATIONS
Machine Overhang 495.0 mm
Stick Length - Long 1180.0 mm
Stick Length - Standard 980.0 mm

Mini excavator hire
- Long and short dipper sticks available - Ample boom swing angles
PRECISION AND CONTROLLABILITY
- Integrated fl ow pump system - Ergonomic and smooth pilot controls
HIGH VISIBILITY
- 3-post canopy design
- Fully glazed cab option
COMFORTABLE AND SAFE CAB
- Unique tilt-adjustable armrests
- Suspension seat option
SAFE AND EASY
- Fully removable side panels
- Easy access to battery

COMPACT DIMENSIONS
With an overall width of only 730 mm (2 ft 5 in) the CatÂ® 300.9D can easily drive through narrow passages and doors. Both indoor and outdoor jobs are now accessible with the under 1000 kg (2,205 lb) weight making easy trailer transportation between sites possible.
EXTENDING UNDERCARRIAGE AND BLADE
An extending undercarriage and fold out dozer blade allow the machine to be configured for excellent working stability and optimum performance. Easy retraction, controlled from the operatorâ€™s seat, enables the machine to pass through narrow openings.
FOLDABLE SAFETY FRAME
A protective ROPS safety frame structure mounted on the front of the machine allows fitting of a guard for extra operator protection during hammer use. The structure folds down in a few seconds for easy machine transportation and storage.

1 tonne excavator hire.
Narrow access excavator hire.
Mini excavator hire.
Mini digger hire

This ladder features a single-rope pull and release system
3.3 - 5.8m 150kg Aluminium Extension Ladder

30metres

Duct extractor hire
Specifications:
Rated input power: 520W
Voltage: 240V
5HP industrial fan hire.

Windblower fan to be used in a wide range of applications.

Industrial petrol fan hire
Wind machine hire
Wind Effects fan hire
Movies or television serials fan hire
Wind machine hire

15HP industrial fan hire.

Giant windblower fan to be used in a wide range of applications.

Industrial petrol fan hire
Wind Effects fan hire
Movies or television serials fan hire
Wind machine hire

Construction temporary fencing hire
3 dollars per linear metre for each day

High performance disc floor sander for edge sanding all types of wood flooring. Also ideal for stair treads and confined spaces.

Floor edging machine hire, edger hire, edge sander hire

The orbital floor sander designed for the sanding and refinishing of all types of wood flooring and outdoor decking, including pre-finished parquet, plank and laminate flooring systems. It is also ideal for sanding between coats of floor finish where a high standard is required.

The HT8 is a high performance 200mm (8") drum floor sander that will level and sand all types of wooden floors, including parquet to a fine score free finish. The HT8 can also be used on a wide range of other surfaces including decking, fibre board, cork and composition floors.
The HT8 breaks down into three simple component parts for easy transport. The high impact ABS injection moulded side guards and drum guard will not scar or scuff walls and protect the HT8 during transportation.
The unique drum rubber resists abrasion and damage caused by exposed nails while providing the feel and touch needed to sand a fine, score free finish. Easily replaced in just 20 minutes the Hiretech drum rubber design minimises downtime and service costs.

Floor sander hire, timber sander hire, drum sander hire, sanding machine hire, floor polishing machine hire, hardwood sander hire, pine sander hire, flooring machine hire, timber floor machine hire, timber sander hire

Padded chair hire
Sturdy steel frame
Padded seat and back
Collapsible frame

Skate Trolley hire
190 dollars per day for the following package.

1) MARQUEE

Built with 57mm hexagonal aluminium legs, the tectonic is the most heavy duty folding marquee on the Australian market. The frame also features pull ring pins for ease of setup, extruded aluminium connectors, steel feet and a spring tensioned roof system. 4 sand bags, side walls and trolley bag.

2) BBQ 6 burner caterer

3) BBQ Spatula

4) BBQ tong

5) 3 folding tables 1.8m

6) 4 stainless steel food trays with lids

7) 2 esky coolers

8) 4x3 trailer

Please feel free to contact us for long term pricing.

Food tray with lid

Forklift attachment hire.
59 dollars 1 day.
149 dollars per week.

Forklift slippers hire
Forklift tynes extension hire
49 dollars 1 day.
169 dollars per week

Forklift crane attachment hire
99 dollars 1 day
269 dollars per week.

FORKLIFT(LPG OR PETROL)
MAKER TOYOTA
MODEL-SERIAL52-8FD25
6m View Triplex Mast

Nail gun hire
Product Specifications:
Fastener Range: 50-90mm
Nail Size: 32-65mm (Wire)
Paslode's Impulse Gas Technology Tools have created a faster and safer method of working on site by eliminating the need to carry heavy air compressors and air hoses.

The Tradieâ€™s choice for all general framing applications.
Increase power - to eliminate standing nails in harder wood types
Optimal performance in extreme weather
Longer run time battery - 9 Skate Trolley hire Skate Trolley hire

Features:
Suitable for electronic devices and construction tools, laptops,radios, televisions, air conditions, tool battery charges, fridges,microwaves, ipad. A stable sine-wave alternator is the only way to ensure your equipment is not damaged
Powered by a Honda engine
Low Oil Protection
Compact design powder coated heavy duty steel roll frames with heavy duty anti-vibration mounts
Light weight with high strength
Brushless
Overhead valve, 4 stroke, unleaded engines with cast iron cylinder sleeves.
Modified Sine wave power - will not damage electronic equipment
Work Cover approved Australia wide
Earth Leakage protection (work cover requirement) Trips generator when earth leakage is detected
IP66 Weatherproof housing and Outlets (work cover requirement)
RCD/MCB Combination (work cover requirement)
10-15 Amp plugs for all power tools and electronic devices
Superior electrical performance and power characteristics THD (Total Harmonic Distortion, less than 5% THD)
Auto-switched outlets
Generator can run for 7.5 hours continuously - No break is needed, just top up the fuel!

Specification:
Max. output: 8 KVA
Rated Frequency: 50 Hz
Rated R.P.M speed: 3000
Rated Voltage: 240V
watts: 6400
Engine: Honda GX390
fuel tank capacity: 6.1 litres
Run time: 2.6 hours
Noise Level: 70 DBA @ 7 meters
Angle anti-vibration mounting system

Application:
Ideal for building sites, hire companies, government department, on the farm.
1.5 to 2.5 HP motors
Power Tools (Drills, jigsaws, rotary hammers, upto 9" grinders, small radial saw)
House hold appliances (toaster, microwave oven, TV, Large fridge, oven/ hot plate, washing machine, dishwasher, cloth dryer, laptops)
Air Conditioner 8 -12 cfm
Welder 140-180 amps
Submersible Pump
Heavy Duty Vacuum Cleaner
Iron
Heating
Lighting

F.A.Q:
What size generator?
Depending on how you will use your generator, there are different categories to meet your needs. This can include recreation, home standby and construction. The most common form of calculating the generator size is by wattage, (1000 watts item requires a 1000 watts generator)
Induction equipment such as Air condition, welder, air compressor and cement mixer require a larger Start Up Power. When calculating, use this formula (watts x 2 or 3) depending on the quality of the generator.
Always remember that simple power management will allow a smaller generator to do a big job. When calculating power requirements, consider the starting requirements are only for the initial start and then additional tools may be operated.
Honda engines are renowned for the ease of starting, even when only equipped with a manual recoil starter. We offer many models and recommend recoil start. often the generator will start with the first pull.
Do I require easy transport?
Consider the options when selecting the right model for your application.
How much power do I need?
Most generators produce AC voltage, very similar to the voltage available in your home, however while your electric utility company produces sufficient power for all your electric powered devices, a portable generator is limited in power output directly relational to the engine horsepower. The amount of power that a generator can produce is rated in watts. Rated power is generally 90% of maximum power as certain components lose efficiency as they are heated from use.
To determine wattage requirements you should determine which devices need to be powered simultaneously and what the starting requirement of the device is. A Wattage Calculator is provided to assist you. Remember that with simple "Power Management" techniques, a small generator can provide adequate power for home or recreational applications.
Can I use my Gensafe generator for my house?
It is not recommended to connect your Gensafe generator to your household power supply. In the wrong circumstances, power can be fed back into the power grid harming someone doing repairs to the power grid. Gensafe generators are general purpose generators and not for use as primary power in place of the power utility or for use in life support systems.

8KVA 13HP Honda Powered Petrol Generator With Earth Leakage & Wheel Kit
Features:
Suitable for electronic devices and construction tools, laptops,radios, televisions, air conditions, tool battery charges, fridges,microwaves, ipad. A stable sine-wave alternator is the only way to ensure your equipment is not damaged
Powered by a Honda engine
Low Oil Protection
Compact design powder coated heavy duty steel roll frames with heavy duty anti-vibration mounts
Light weight with high strength
Brushless
Overhead valve, 4 stroke, unleaded engines with cast iron cylinder sleeves.
Modified Sine wave power - will not damage electronic equipment
Work Cover approved Australia wide
Earth Leakage protection (work cover requirement) Trips generator when earth leakage is detected
IP66 Weatherproof housing and Outlets (work cover requirement)
RCD/MCB Combination (work cover requirement)
10-15 Amp plugs for all power tools and electronic devices
Superior electrical performance and power characteristics THD (Total Harmonic Distortion, less than 5% THD)
Auto-switched outlets
Generator can run for 7.5 hours continuously - No break is needed, just top up the fuel!

Specification:
Max. output: 8 KVA
Rated Frequency: 50 Hz
Rated R.P.M speed: 3000
Rated Voltage: 240V
watts: 6400
Engine: Honda GX390
fuel tank capacity: 6.1 litres
Run time: 2.6 hours
Noise Level: 70 DBA @ 7 meters
Angle anti-vibration mounting system

Application:
Ideal for building sites, hire companies, government department, on the farm.
1.5 to 2.5 HP motors
Power Tools (Drills, jigsaws, rotary hammers, upto 9" grinders, small radial saw)
House hold appliances (toaster, microwave oven, TV, Large fridge, oven/ hot plate, washing machine, dishwasher, cloth dryer, laptops)
Air Conditioner 8 -12 cfm
Welder 140-180 amps
Submersible Pump
Heavy Duty Vacuum Cleaner
Iron
Heating
Lighting

F.A.Q:
What size generator?
Depending on how you will use your generator, there are different categories to meet your needs. This can include recreation, home standby and construction. The most common form of calculating the generator size is by wattage, (1000 watts item requires a 1000 watts generator)
Induction equipment such as Air condition, welder, air compressor and cement mixer require a larger Start Up Power. When calculating, use this formula (watts x 2 or 3) depending on the quality of the generator.
Always remember that simple power management will allow a smaller generator to do a big job. When calculating power requirements, consider the starting requirements are only for the initial start and then additional tools may be operated.
Honda engines are renowned for the ease of starting, even when only equipped with a manual recoil starter. We offer many models and recommend recoil start. often the generator will start with the first pull.
Do I require easy transport?
Consider the options when selecting the right model for your application.
How much power do I need?
Most generators produce AC voltage, very similar to the voltage available in your home, however while your electric utility company produces sufficient power for all your electric powered devices, a portable generator is limited in power output directly relational to the engine horsepower. The amount of power that a generator can produce is rated in watts. Rated power is generally 90% of maximum power as certain components lose efficiency as they are heated from use.
To determine wattage requirements you should determine which devices need to be powered simultaneously and what the starting requirement of the device is. A Wattage Calculator is provided to assist you. Remember that with simple "Power Management" techniques, a small generator can provide adequate power for home or recreational applications.
Can I use my Gensafe generator for my house?
It is not recommended to connect your Gensafe generator to your household power supply. In the wrong circumstances, power can be fed back into the power grid harming someone doing repairs to the power grid. Gensafe generators are general purpose generators and not for use as primary power in place of the power utility or for use in life support systems.

Tiles glue mixer hire
Grout mixer hire
Plaster mixer hire

29 dollars 1 day
69 dollars per week

AVAILABLE WITH ELECTRIC CORDLESS BLOWER OR PETROL BLOWER
The Gutter Cleaner is a new product that allows the user to clear gutters of leaves and debris without the use of a ladder or climbing onto the roof. It attaches to a leaf blower and can be used on single and double storey gutters. The cleaner propels and guides itself along the gutter and uses the air from the blower to blow out the leaves.

NO LADDER REQUIRED
You can safely clear gutters of leaves and debris â€“ even up to two storeys high â€“ without needing a ladder.
By holding the lightweight, rigid air supply pipe, you can reach most single storey gutters whilst an extension kit (available separately) can be used to clean higher ones â€“ even double storey.

Manual winch lifter hire
Capacity 181kg
Fork Height Range 90 - 2500mm
Fork Overall Width 630mm
Fork Length 570mm
Dimensions 850 x 650 x 2500mm
Weight 60kg

Hand Trolley, Skate Trolley hire, Wooden Skate Dolly hire, Pallet Dolly hire, Furniture Dolly hire
"

A powerful heat gun with variable temperature and electronic thermocouple control for flexible use and maximum reliability. The heating element ensures long life and even heat.

Well suited for plastic welding, packaging, automotive, maintenance, and other applications requiring variable temperature or pinpoint reduction of heat output.

Variable temperature and airflow control
Durathermâ„¢ heating element
Thermocouple controlled
Reduction nozzles are approved for use on Professional Heat Guns with electronic thermocouple control
"
Double Bladed Sword Saw hire 480mm
Hebel blocks saw hire
Cylinder displacement
21.7 cmÂ³
Power output
0.6 kW
Knife Length
59 cm
Weight
4.9 kg

Extreme 4800PSI cleaning power (fully adjustable)
Powerful 20HP
20M Hydraulic pressure hose
Inlet Hose with filter for up to 50Â°C water

Integrated fine mesh water filter
Garden hose adapter A3/4"
High-pressure hose, 3 m
Cleaning agent hose, With filter
Single spray lance

SPECIFICATIONS
Voltage 18V
Battery M18â„¢ REDLITHIUMâ„¢ XC4.0
Charger M18â„¢ and M12â„¢ Multi-Voltage Charger
Nut-Busting Torque
1,200 ft-lbs
LED Light Yes
Electric Brake Yes
Switch Type Variable Speed Trigger
Anvil Size and Type 3/4" Square - Friction Ring w/ Thru Hole
Torque 375 ft-lbs (Mode 1) and 750 ft-lbs (Mode 2)

20 METRES Retractable Inertia Reel Self Retracting Lifeline.
Fall Arrest reel hire
69 dollars 1 day
199 dollars per week

USB Inspection camera

ISUZU NPR 300 TIPPER
Type: Trucks
Sub Type: Tipper
Year: 2009
Category: Rigid
Power - kW: 114
Drive: 4x2
GVM - kg: 6,500

Hydraulic Smart Trolley
FEATURES
Built in shock absorbtion
Huge angle range
Shock absorbing design
Impact reducing ergonomic design
weight: 24.8kg (without hammer)
Machine Dimensions (without hammer):
Max length: 1250mm
Max Height: 640mm
Max Width: 520mm

Price for Post hole digger hire only.

The 6 Series Loader comes with huge 23â€³ tyres to give better ground clearance, faster ground speed and high puncture resistance. We keep you working longer! Perfect for all terrains due to the independent 4-wheel hi â€“torque drive system, and coupled with the 23inch tyres allows this loader in the most undulating places with an amazing 185mm of ground clearance. Proving popular for a variety of uses such as a rental yard or general contractor, the Kanga 6 series has a hydraulic system pressure of up to 3250 psi that ensures incredible power and durability. Delivering up to 45lpm of hydraulic flow, this 25hp Kubota Diesel engine will guarantee jobsite productivity and make the job even easier to cope with our harsh conditions. A factory fitted heavy-duty two-stage 5 inch Donaldson air cleaner also comes standard. With many aftermarket options to consider the 6 Series will certainly give you the leading edge in your industry.
Loader Model: DW625
Engine Model: Kubota D902 Diesel Ground Clearance 185mm
Power: 17.5kW Cooling: Water Cooled
Life Capacity: 250kg Travel Speed 7.5km/h
Fuel Capacity: 45L System Pressure: 220BAR
Operating Weight: 972kg Width: 1030mm

KANGA attachments available in our store.

Multi Position Ladder hire

Laser functionality Square, Level, Align, Plumb
Accuracy Â±2 mm at 10 m
Max. operating distance 10 m (Lines), 50 m (Lines, with receiver)
Self-levelling range at room temperature Â±3 Â°
Laser line width at 5m distance < 2 mm
Laser class < 1 mW, 635 nm, Class 2 (IEC 60825-1:2008), Class II (FDA CFR 21 art. 1040)
IP protection class IP 54 (IEC 529)
Battery type 4 x 1.5 V (AA)
Weight with batteries 990 g
Dimensions (LxWxH) 124 x 124 x 187 mm
Automatic switch-off Yes
Tripod thread diameter 1/4 in, 5/8 in
Vertical side fan angle 240 Â°
Plumb type Plumbing and additional horizontal and vertical alignment
Horizontal fan angle 180 Â°

Features:
Compact shape and intuitive ease of use: The Leica DISTOâ„¢ D110 is the smallest and the lightest laser distance metre in the DISTOâ„¢ product range. Its ergonomic design guarantees that the device fits perfectly in a hand and is comfortable to use. The self-explanatory buttons allow quick and intuitive operation. Measuring has never been easier!
BluetoothÂ® Smart and Leica DISTOâ„¢ sketch app: The latest Leica DISTOâ„¢ sketch app is the ideal link between the Leica DISTOâ„¢ D110 and a smartphone or a tablet. Once connected to compatible devices, users can instantly start creating floor plans, sketches and photo-documentation with precise measurements.
Quick distance and area measurements: The Leica DISTOâ„¢ D110 is the perfect device to take effortless distance and area measurements. Whether an interior designer, painter or building contractor, the Leica DISTOâ„¢ D110 will make it easier to get the job done right.
Removable pocket clip The removable pocket clip guarantees quick attachment, easy carrying and direct access to the Leica DISTOâ„¢ D110.
ISO Standard 16331-1 â€“ The new benchmark for reliability With an ISO-certified Leica DISTOâ„¢ D110 it is guaranteed that the accuracy and range mentioned on the package can be achieved on the construction site.
Functions:
Distance measurement; Continuous measurement
Area; BluetoothÂ® Smart
Specifications:
Typ. measuring accuracy: Â± 1.5mm
Range: 0.2 â€“ 60m
Measuring units: m, ft, in
Power Range Technologyâ„¢: Yes
Display illumination: Yes
Free App: Yes
Data interface*: BluetoothÂ® Smart
Measurements per set of batteries: up to 5000**
Batteries type: AAA, 2 Ã— 1.5V
Protection class: IP 54 (dust and splash water protected)
Dimensions (L x W x H): 120mm Ã— 37mm Ã— 23mm
Weight: 90g
Supported devices (BluetoothÂ® 4.0):
iPhone 5
iPhone 4S
iPad mini
iPad 3
iPad 4
iPod touch (5th Generation)
Smart phones and tablets with Android 4.3 or higher
Tablets with Windows 8 or higher

Powerful and trusted Subaru 190cc 4 stroke engine
11.2Nm (8.2 foot pound) of torque - huge torque to get through even the most dense of grass
460mm (18") Cutting path - 10 - 75mm cutting height
4 x swing back blades for a superior cut and safety

Garden Roller hire
Turf roller hire

The 60L drum allows you to adjust the rolling weight to suit each use.
Suitable to press grass seed into the soil
Individually serial numbered
5 tonnes
Individually serial numbered
Engine: 2-stroke Cubic Capacity: 24.5cc Horsepower: 1.3hp (DIN) Tank Capacity: 0.5 litre Ignition: electronic Power rating: 980w Net Weight: 4.1kg

Load moving skates are mechanical handling equipment used to transport heavy machinery and other items in the work area. Machinery skates mainly use nylon, polyurethane or steel wheels / castors and work though are also less often fitted with roller tracks, like tank tracks (Economical and ideal for general workshop moving jobs, all types of machine tools, fabrication etc).
Load skates hire , Load Moving skates hire, Lifting skates hire, machinery skates hire

Capacity
Load Wheels
Wheel Size
(mm)
Skate Size
(mm)
Weight
(kg)
6T 6 75 395 x 330 x 101 13.8

Load moving skates are mechanical handling equipment used to transport heavy machinery and other items in the work area. Machinery skates mainly use nylon, polyurethane or steel wheels / castors and work though are also less often fitted with roller tracks, like tank tracks (Economical and ideal for general workshop moving jobs, all types of machine tools, fabrication etc).

Load skates hire , Load Moving skates hire, Lifting skates hire, machinery skates hire
Capacity Load Wheels Wheel Size Skate Size Weight
10T 14 24 x 84mm 267 x 146 x 133mm 17kg

Ideally designed to move Industrial Equipment
12-tonne splitter log cutter hire
Eight-inch wheels for effortless relocation
AUS/NZ-standard dual redundancy safety
Suitable for timber up to 350mm (W) x 620mm (L)

99 dollars 1 day.
299 dollars per week.
Specifications:Capacity (Diameter): 35mm
Capacity (Depth): 52mm
Motor Power: 920Watt
Input Power: 1000Watt Single
Phase 240V
Speed: 350rpm
Weight: 10.0kg
Magnetic Dead Lift: 9500N-m on 25mm Steel Plate
Stroke: 70mm
Height (min/max): 306 / 376mm

Features
Total mobility and complete independence from electrical power supplies
Fully automatic piston return and cartridge advance achieves a higher marking rate without need to manually cycle the tool
Marks may consist of up to 10 characters in any combination of letters and numbers in different type sizes
A simple but secure locking mechanism ensures that the letters or numbers can be changed quickly and easily
Marking on steel surfaces
Marking hot or cold slabs, blooms, billets and ingots, light, medium or heavy-duty steel sections in steel mills
Stamping serial numbers on component parts of aircraft, ships, offshore platforms, rail cars, cranes, earthmoving equipment and other automotive parts in various heavy industries
Identification and approval marking of metal parts by standards organisations and other approval or statutory agencies

Cartridge type .27 calibre short, 6.8/11 M10
Automatic piston return Yes
Noise (power) level: LWA, 1s 110 dB (A)¹
Weight 4.62 kg
Dimensions (LxWxH) 425 x 72 x 180 mm

Portable tent hire
Gazebo hire 3x3metres

Brick saw hire

Cutting equipment
Blade diameter: 350 mm
Max cutting depth: 100 mm
Max cutting length: 700 mm

Dimensions
Weight (excl. cutting equipment): 92 kg
Product size
Integrated fin for greater efficiency
Forged Head
Offset Pick
Fibreglass handle with rubber overmould

Operation Type
Swivel Head
Cutting Head Beam Type
Manual
Cutting Head Beam Return
Manual Return
Cutting Head Down Feed Control
Adjustable Hydraulic
Round @ 90Âº
250mm
Round @ 45Âº
235mm
Square @ 90Âº
250mm
Square @ 45Âº
235mm
Rectangle (W x H) @ 90Âº
468 x 250mm
Rectangle (W x H) @ 45Âº
250 x 240mm
Vice Clamping Fixture
Manual
Coolant System
Table Working Height
570mm
Blade Steps / Speeds
Variable 18-102 M/min
Blade Size (L x W x T)
3090 x 27 x 0.9mm
Motor Power
1.5kW / 2hp
Voltage
415V
Weight (nett)
380kg

Tight access loader hire (similar to DINGO HIRE)
4 in 1 bucket.
Auger Earth Drill
Trencher
Grader attachment
Soil leveler
Tow bar

Call or email us for attachment pricing.

Heavy Duty Miter Saw Stand hire

Universal design works with all brands of miter saws
Lightweight aluminum construction allows for easy transport to and from the jobsite.
5-1/2-Inch beam extends to support up to 16-Feet of material.
Miter saw mounting brackets allow easy and secure mounting of miter saw to stand.
Non-marring feet on tool mount will not scratch material

305mm Slide Compound Mitre Saw
DXT (Deep eXact Technology)
Capable of diagonal cutting up to 203mm crown moulding
Capable of vertical cutting up to 165mm baseboard
Electric brake
Electronic with soft start and constant speed control
Bevel range of 45Â° right and left with positive stops at 22.5Â°, 33.5Â°, 45Â°
Mitre range of 60Â° right and 52Â° left
Quick and accurate mitre angle lock
305mm BluMak blade
Vertical vise
Dust bag
Triangular rule
Socket wrench
2 x spare lock-off buttons
Holder set
Hex wrench
Saw stand available for 5 dollars per day.

Detector hire, rebar detector hire, ferroscan hire, concrete scanner hire

Accuracy of depth indication: Â±10 mm
Localisation accuracy: Â±5 mm
Max. detection depth for object localization: 150 mm

Helps you drill right the first time â€“ knowing where to drill helps avoid costly repairs, saves time and drill bits
Built-in display for easy location of objects detected plus indication of approximate embedment depth and type of material â€“ no expert skills required
Detection of ferrous and non-ferrous metal, live cables, plastic pipes and other objects such as wood and cavities
Easy menu navigation for selection of the appropriate scanning mode for different base materials (universal, concrete, wet concrete, floor heating, drywall, hollow brick)
Detecting metal, wood or plastic objects and electrical conduits at depths up to 150 mm
Locating underfloor heating pipes or other pipe and cable runs
Setting anchors in hollow or thermally activated slabs
Locating studs for efficient fastenings

Specifications:
Magazine Capacity - 1000pcs
Weight - 1.4kg
Overall Length - 259mm
Operating Air Pressure - 60-115psig
Nail Size - 15-50mm

Technical Data
Cartridge type .27 calibre short, 6.8/11 M10
Power (max.) 325 J
Collated Yes
Fastener intake 10 nails
Fastener length range 14 - 72 mm
Automatic piston return Yes
Noise (power) level: LWA, 1s 105 dB (A)¹
Weight 3.57 kg
Weight according to EPTA Procedure 01/2003 3.6 kg
Dimensions (LxWxH) 467 x 72 x 180 mm
Concrete nail gun hire

Dumpy hire
Height accuracy (single measurement): Â±1.5 mm at 30 m
Magnification: 28 x
Shortest target distance: 0.65 m
Package Contents:
1x Optical level POL 15
1x Adjustment wrench POA 10
1x Case
1x Tripod PUA 25
1x Measuring rod

Oxy set hire
D gas bottles
Uses wire collated nails
Oversized bore for driving .084" Pallet Plus Nails
Oversized canister opens completely for easy reloading
Tool-free adjustable exhaust
SPECIFICATIONS
Length 10-1/2" (266.7mm)
Width 5-1/4" (133.4mm)
Height 12-7/8" (327.0mm)
Weight 5.8 lb (2.63 kg)
Magazine Capacity 225-350 Nails
Operating Pressure 70 - 120 PSI
Thread Fitting Type 1/4" NPT
Vibration / Uncertainty 2.75 / 1.375 m/sÂ²
Power type Pneumatic
Noise LPA 1sd 92.90 | LWA 1sd 98.80 | LPA 1s, 1m 85.80
Series Fasteners Fastener Length 1-1/4" to 2-1/2" (32 - 65mm)
Shank Diameter .084" (2.1mm)
"
Pallet Truck hire
2000/2500kg Capacity

Hand pallet truck, ideal for every day use. It's fork size is the most popular and universal. The width across the forks of the pallet truck and the fork length allow it to handle Europallets and well as UK (GKN/CHEP) pallets.
Capacity: 2000 or 2500kg
Length of Forks: 1150mm
Width over Forks: 540
Steer Wheels: Nylon
Load Wheels: Single Nylon

Fitted with nylon wheels as standard.
The pallet truck's hydraulic pump unit is fitted with an overload protection valve, fingertip operated controlled lowering valve and all wheels are fitted with sealed ball bearings.
"
Telescopic mast has full free lift and adjustable forks. The forks lower to the floor between the outriggers.
Load Capacity 900kg
Power24 volts
Standard Battery87 amp/hour
Head Length34.2 in

Capacity 400kg
Lift Range 200 - 1500mm
Platform Size 590 x 650mm
Overall Height 1630mm
Weight 40kg

Platform stacker hire
Manual forklift hire

Capacity (Kg) 500kg
Fork Height Range (mm) 50- 1930mm
Weight 190kg
Fork Overall Width (mm) 620mm
Fork Length (mm) 760mm
Dimensions (mm) 1180 x 810 x 2350mm

Rendering mixer hire
Bricklayers mixer hire
Petrol concrete mixer hire

QUICK SPECIFICATIONS
Brake Type:
Mechanical Front Axle Disc Brakes
Suspension:
Parabolic Spring
GTM:
2000kg
Tare:
300kg
Payload:
1700kg
Wheel Type:
New 8ply LT tire 13" steel Ford rim
Deck Width:
1100mm
Overall Length:
4000mm
SKU:
SW2000C
Weight:
300.000 KGS

Rated Power (KVA) 5.5
Range of Output Current 20-45amps
Duty Cycle 25%
Primary Input Voltage 240v single phase
Current Range 20-45amps
Max Cutting Thickness (mm) 16mm clean, 20mm severence
Dimensions (mm) 410x165x330
Protection Class IP21S
Insulation Class F
Weight 9.8000

It is an adjustable and purpose designed wallboard holder and lifter
Panel lifters give you the power of 2-3 men
This Telescopic Ceiling Support is easy to operate with just one hand and features a sensitive trigger for graduated leveling or lifting.
Pivoting and rotating feet
Easy to operate with just one hand
Sensitive trigger for graduated levelling or lifting

Drywall gun hire
Drive Shank 6.35mm (1/4") Hex
Net Weight 2.3kg
No Load Speed 4,000rpm
Overall Length 424mm
Specifications - Capacity - Collated Drywall Screw 4mm dia. x 25-41mm
Voltage 18V

Board trolley
Features
Sturdy tubular design with welded steel construction
Two fixed castors for better manuverability
Dismantles to fit in the boot of most cars
Reduces the chance of physical strain

SANDS WALLS AND CEILINGS
The swivel-mounted head adapts to every angle surface: you always
work in a comfortable position thatâ€™s easy on the operator.
A FINE FINISH
The patented sanding pads are cushioned to eliminate swirl marks.
REACHES EVERYWHERE
With the long neck
500 Ã— 408 x 1200mm

Wacker plate hire
Compactor hire

Makita SP6000JT - 240V 1300W 165mm Circular Plunge Cut Saw With 2x1400mm Guide Rail
Kit Includes:
1 x Makita SP6000K 1300W 165mm Plunge Cut Circular Saw.
2 x Makita 194368-5 1400mm Guide Rail - 1943685.
1 x Makita P-20177 - 2 Piece Rail Joiner Set.
1 x Makita 194385-5 - Saw Clamp Set For Guid Rail - 1943855.
1 x Makita P-67810 - Guide Rail Protective Bag(Holder) Blue.
1 x TCT saw blade.
1 x Hex wrench.
1 x Carry case.
Makita SP6000JT - 240V 1300W 165mm Circular Plunge Cut Saw
Features:
Powerful 1
Group-microphone systems designï¼ŒCan be expanded to 14 sets wireless microphone use
8"3 Audio road coaxial speakers
slot CD/MP3/SD/USB player
Built-in echo volume function and Intimate setting storage pockets
Dual electronic protection circuit design
AC/110Vï¼ŒAdd-ins DC/12Vï¼ŒDuplex power supplyï¼ŒBuilt-in /12V/7.2Ah chargeable battery
External signal connections-side seatï¼Œgood expandability

Amplifying host specification
Output Power 70W/4Î© MAX
Frequency Response 100Hz~15KHzÂ±3dB
Speaker settings 8" coaxial 3 audio road
T.H.D.(1KHz) <1.5%(1KHz)
Input Terminal (Ã˜6.3) MICÃ—2 Auxiliary InputÃ—1
Output Terminal ( Ã˜6.3) AuxiliaryÃ—1 External speakersÃ—1
CD Seat Slot CD/MP3/SD/USB
Antenna Built-in
Power Sluppy AC 110V/DC 12V
Dimension (WÃ—DÃ—Hmm) 285Ã—316Ã—520mm(With hand excluding parts bags)
Weigh (kg) 18.4kg
Appearance Material Wooden box / PVC Black surface
DC OUT DC 12V/1A (Maximum)

1 Man Earth Auger hire

A powerful and robust earth auger
Description
Combines power and control to give you the smoothest and quickest chisel action for any size project. It elevates the concept of reciprocating carving to a whole new level! A versatile tool for wood carvers; sculptors; tradesmen and DIYers. Creates precision joints; easy recesses and precise corners in minutes.

Heavy-Duty
Drill Capacity
32mm
Motor Power
2hp
Motor Voltage
240V
Overall Height
1710mm
Weight (Nett)
130kg

Bench drill hire
Pedestal drill hire

19 dollars 1 day
49 dollars per week
Acrow prop hire 2.72m

Maximum load capacity when closed (1.63m) is 3600kg. Extended (2.72m) is 2400kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
22 dollars 1 day
59 dollars per week
Acrow prop 3.5m
Maximum load capacity when closed (1.98m) is 3000kg. Extended (3.35m) is 1900kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
Acrow props hire 3.96m

Maximum load capacity when closed (2.59m) is 3500kg. Extended (3.96m) is 1400kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
Acrow prop hire 5.13m

Maximum load capacity when closed (3.28m) is 3100kg. Extended (5.13m) is 900kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
Racking hire
40 dollars each linear metre per week.
2100mm x 600mm

Binder Load Binder hire

Swivel Head Grab Hook
Ergonomically Designed
Safer
Ratchet hire
Webbing Width: 50mm
Strap Length: 9.15m
Working Load Limit (WLL): 1500kg
End Fitting: Double J Hook

The TC 238 is ideal for homeowners and landowners with larger gardens who need a durable and comfortable tractor with high manoeuvrability. It is an efficient garden tractor that offers excellent collection of grass clippings as well as leaves, giving tidy cutting results. The spacious, integrated collector is easily emptied from the driverâ€™s seat. Equipped with a powerful Husqvarna Endurance Series engine, including choke less start, as well as pedal-operated hydrostatic transmission and cast front axle for extra convenient and trouble-free operation.
Engine manufacturer
Briggs & Stratton
Power
14.9 kW
Transmission type
Hydrostatic
Cutting width
97 cm
Ride-on lawn mower hire
Rider hire
Engine manufacturer
Briggs & Stratton
Power
14.9 kW
Transmission type
Hydrostatic
Cutting width
107 cm

Floor cutter hire.
Roadsaw hire
Asphalt saw hire
Max. Blade Diameter: 450mm
Max. depth of cut: 165mm
Diamond blade charge according to the use

Anti Vibration rear handle. This Rotary Hammer is built for the heavy drilling tasks.
3 mode - Rotary Drilling / Chiselling / Drilling

SDS Max Combination Hammer hire
Features:
Perfect for drilling anchor fixing and holes in concrete and masonry from 12mm- 45mm in diameter with core drilling up to as much as 100mm
Chain drive boosts durability and efficiency along with an oil-filled gearbox that ensures 100% component lubrication as well as outstanding heat dissipation
Active Vibration Control, AVC, system has a floating rear handle plus damped side handle to decrease vibration
Ergonomically designed to be compact with a slim-line design that optimises control while offering user friendly access to tight spaces
Rotation-stop is ideal for medium to light demolition jobs
Innovative dust sealing protection stops dust from getting into the hammer mechanism which means extended service life and durability
Hammer mechanism reduces number of components and improves dampening to provide max impact energy, making it possible to drill into hardest concrete
High efficiency mechanism provides impact blows right to the bit without any losses through excessive vibration and rebound dampening reduces stress to the tool
Soft rubber grip handles help eliminate operator fatigue
Electronic variable impact energy-speed for complete control when using smaller bits and light material
Lock-on switch for better control in chipping mode
Electronic service and brush wear indicator tells you when brushes need to be replaced and when product needs to be serviced
Excellent power-to-weight ratio with 8 Joules of impact energy provided by a 6.8kg hammer
Durable yet lightweight magnesium housing
Specifications:
Power Input (W) 1250 Watts
Power Output (W) 615 Watts
Load Speed (RPM) 210-415 rpm
Blows per Minute (BPM) 1430-2840 bpm
Impact energy EPTA 05/2009 (J) 8 J
Tool Holder (type) SDS-Max
Max. Drilling Capacity Concrete (mm) 45 mm
Max. Drilling Capacity Breakthrough bit (mm) 65 mm
Max. Drilling Capacity Core bit (mm) 100 mm
Weight (kg) 6.8 kg
Length (mm) 477 mm
Height (mm) 245 mm
Width (mm) 104 mm
Hand/Arm Vibration 8.8 m/s2
Uncertainty K 1 (Vibration) 1.5 m/sÂ²
Hand/Arm Vibration Chisel 7.2 m/sÂ²
Uncertainty K 2 (Vibration) (dBA) 1.5 m/sÂ²
Sound Pressure (dBA) 92 dB(A)
Uncertainty K 1 Sound (dBA) 3 dB(A)
Accoustic Pressure (dBA) 103 dB(A)
Uncertainty K 2 Sound (dBA) 3 dB(A)

Features:
Aluminum Material
Function-Oriented Lifting System
Unique Anti-slip Chain
Scale Bar
Telescopic head
Quick release legs
Suitable for all lasers and levels.
CPI CPI505G Greenbeam Rotating Laser Level Kit - CPI505G
Includes:
Green Beam Rotary Laser
Receiver
Clamp
Remote Control
Wall Mount Clamp
Green Laser Glasses
Green Magnetic Laser Target
Sturdy Carry Case
Operating manual
Features:
Green Beam provides superior visibility in outdoor and indoor lighting conditions
Maximum utility for your mid-range exterior/interior layout projects
Fully Automatic
Horizontal and Vertical Applications
Self Leveling
Long Range
Waterproof
Shock proof
High Accuracy
Main applications:
General building and construction
Concreting
Formwork
Landscaping and Agriculture
Excavation and earthmoving
Civil work
Survey
Paving
Footings
Interior fit out
Tiling
Fabrication
Electrical set out
Specification:
Accuracy
Horizontal: Â±20"
Vertical: Â±20"
Self-leveling range: Â±5Â°
Working distance diameter: 500m (with detector)
Rotation speed: 0, 60, 120, 300, 600r.p.m
Scanning feature: 0Â°, 10Â°, 45Â°, 90Â°, 180Â°
Setting slope: Â±5Â°(dual axis)
Wave length: 532nm
Down Point Accuracy: Â±1mm/1.5m
Remote control distance: approx. 20m
Work Temperature: 0Â°C - 40Â°C
Power: DC 4.8-6V (NI-MH rechargeable)
Work time: approx 15hrs
Water-proof: IP 64
Dimensions (L x W x H): 135mm x 185mm x 175mm
Weight: 2.2kg

ROTARY TILLER
This heavy duty tiller turns the toughest ground into a beautiful garden bed or ready for sod and turf.
Width650mm / 26â€³
Weight66kg / 145lbs
Cutting Depth100mm / 4â€³
Fwd â€“ RevFingertip Control
Cultivator hire
Hydraulic hoe hire
Tiller attachment hire
Rotavator hire

Individually serial numbered
Scaffold chutes
8 dollars per day for each linear metre.
Rubbish tubes hire

3 dollars 1 day
9 dollars per week

Complies To Australian Standards: AS/NZ 1891.1:2007
Full Body Harness With Floating Shoulder And Leg Straps
Made From Bright And Durable Polyester Webbing
Fall Arrest With Frontal Attach Loops Linked To A Floating Rear Comfort Strap.

Sandblasting Hopper 19 Litre
Approx. Inside Cabinet Size (LxWxH)
Ã˜270 x 520mm approx.
Recommended Free Air Delivery
254L/min. @ 100psi
Floor Space with Door/Lid Open (L x W x H)
370 x 370 x 705mm
Weight (Nett)
6.5kg

Air compressor
Specifications:
Tank: 70L
Power: 1.1kw x 2
Noise: 81 (dB)
Intake Volume: 400L/min
Cmf: 14-15
W.P: 8Bar
Net Weight: 50kg
Voltage: 240V/50Hz
Size: 83 x 38 x 78 cm

Approx. Inside Cabinet Size (LxWxH)
590 x 500 x 300-360mm
Recommended Free Air Delivery
254L/min. @ 100psi
Floor Space with Door/Lid Open (L x W x H)
700 x 500 x 930mm
Weight (Nett)
19kg

Aluminium mobile scaffold hire 8.6m working height 99 dollars per day.
3 days minimum charge

Aluminium mobile scaffold hire 3.9m working height 99 dollars per day.
2 days minimum charge

Aluminium mobile scaffold hire 4.7m working height 39 dollars per day.
2 days minimum charge

Aluminium mobile scaffold hire 5.76m working height 99 dollars per day.
2 days minimum charge

Aluminium mobile scaffold hire 6m working height 59 dollars per day.
3 days minimum charge

Aluminium scaffold hire 7m.
2 days minimum charge

Aluminium mobile scaffold hire 8.6m working height 99 dollars per day.
3 days minimum charge

Aluminium Telescoping Plank hire 3.0m to 4.5m

Max Working Height 7790 mm
Max Platform Height 5790 mm
Max Platform Weight Capacity 272 kg
Platform Length 1630 mm
Platform Width 740 mm

New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=lifting+%25&category=Scissor+Lift&make=Genie&model=GS1930&modelid=108586#ixzz4C1pATSzB

Grouts mixer
Screeds mixer
Crumbed Rubber mixer

Mixer for tiling screed

Metal garden shed hire 1.52 x 0.78 x 1.95m
"
Dimension
Dimension : 510 x 290 x 425 (mm)
Dry Weight : 21 kg
Features:
Maximum Output : 2000VA
Rated AC Output : 1600VA
DC Output (Generator /Charger) : 12V-8.3A
Battery Charging : Yes
Frequency Meter : No
Volt Meter : No
Generator Type : Mulitpole field rotation type (inverter)
Rated Voltage : 240 (V)
Rated Frequency : 50 (Hz)
Fuel Gauge : No
AC Circuit Breaker : Yes
DC Circuit Break : Yes
Auto Throttle : Eco-throttle
Auto Choke : No
Large Capacity Air Cleaner : Yes
Large Capacity Fuel Tank : Yes
Large Capacity Muffler : Yes
Pilot Lamp : Yes
Air Cleaner : Dual element type
CONDITION *With eco-throttle switched on at 1/4 output
Peace of Mind:
Engine is protected via low oil alert system.
Up to 15 hours of continuous operation on a full fuel tank.
"
Finished in bright yellow
Single phase carpet dryer

Lightlift 14.72 IIIS is an innovative, compact and light tracked aerial platform.
Created to simplify as much as possible the use of the machine by the operator, making life easier for the hirer.
Weighting only 1380 kg it can be transported with a car driving licence.

Capacity platform 120kg - 200kg
Max. Working height 13,90m (120kg) - 12,25m (200kg)
Max. Horizontal working outreach 6,76m (120kg) - 5,92m (200kg)
Transport length 4,01m
Transport length without basket 3,79m
Standard basket dimensions 1335x690xh.1100m
Maximum stabilisation angle 10Â°
Max slope allowedin travel mode 16Â°/28,7%
Total weight 1398kg - 1490kg Lithium-ion
Petrol engine HONDA iGX270 - HONDA iGX390
Diesel_engine HATZ 1B30
Electric motor 2,2kw-230V-50Hz / 2,2kw-110V-50Hz
Lithium-ion powered 4,8 KWh
Max. Travel speed - petrol version 1,3km/h - 2,6km/h (optional)
Max. Travel speed - diesel version 1,5km/h - 3km/h (optional)
Max. Travel speed - lithium-ion version 1,1km/h - 2,1km/h (optional)
Max ground pressure on stabilizer 1200 daN - 1,7daN/cm2
Stabilization area 2907x2866mm
Swager 600mm Hand Swaging Tool
600 mm (24 inch) Swager tool with Cutter.
Heavy Duty Heat Treated alloy jaws
from 3.2mm up to 8mm wire swages / ferrules
Steel Wire Rope Crimping Tool Crimper

Fitted with functions like a powerful heating element
Ladder Length 3.6 metres

Load Weight Capacity 150kg

Material
Plastic Housing / Rubber Grip (IP 54 Protection)
Colour
Blue
Product Dimensions (mm)
W:85 H:200 L:32
Package Dimensions (mm)
W:165 H:260 L:75
Audio Alert
Yes
Batteries Included
Yes
Number of Batteries Required
1
Battery Type Required
9 V 6LR61
Detects Metal
Yes
Detects Voltage
Yes
Digital Display
Yes
Maximum Wall Thickness (mm)
120

2440 x 762 x 737mm Folding Trestle Table hire
Folds in half for easy transportation and storage
Convenient lightweight design
Durable and waterproof
Stain resistant and easy to clean

Marquee 183 x 76 x 73cm Bi-Fold hire

Solid steel frame construction
Folds in half for easy storage and transport
Patented locking mechanism secures into once piece

The Table Saw is the perfect addition to any home workshop. Featuring a powerful 1800W motor and a 254 mm (10") Blade, the unit is capable of most domestic table top sawing applications.

The soft start feature coupled with a premium blade guard enhances user safety during operation and a dust port on the side of the unit can be coupled with any suitable extraction unit.

The unit includes a folding stand that positions the saw at an optimal waist height for easier use and is equipped with wheels, making movement around the workshop quicker and easier.

An extension table, ripping fence, mitre gauge, push stick and 48 tooth T/Carbide blade are also included.
1800W motor
254mm/10" blade size
Electronic soft start for user safety
Extension table for larger applications
Easy height and bevel adjustment

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

Planer hire
Maximum capacity of 318 mm wide & 153 mm High
Easy height adjustment winder
8 m per minute planing speed

Sigma 75cm Tile Cutter hire

29 dollars 1 day
99 dollars per week

Galvanized tilt trailer hire 7x4

1900kg payload

The 7 Series diesel loader incorporates features that offer you an edge in power, speed, durability, ease of use, economy and safety.
Managing a load of up to 260kg and a breakout force of up to 600kg. The 7 Series comes standard with tracks for increased stability on uneven surfaces.
Loader Model: DT725
Engine Model: Kubota D902 Diesel Ground Clearance 195mm
Power: 18.5kW Cooling: Water Cooled
Lift Capacity: 260kg Travel Speed 7.7km/h
Fuel Capacity: 49L System Pressure: 220BAR
Operating Weight: 1025kg Width: 1040mm
Bucket Max Rollback: 40Â°
posi loader hire
track loader hire

TIGHT ACCESS HYDRAULIC TIPPER

700MM WIDE TRACKED DUMPER

Galvanized trailer hire 7x4

Trencher hire 100mm x 800mm
Mini loader 159 dollars per day.

The trenchless NO DIG MOLE eliminating or greatly reducing all re-instatement costs involved in the installation of underground electric cables, telecommunication cables (Fiber Optic), conduits and small pipes.

Moling Equipment hire.
Trenchless tool hire
Pneumatic Earth Piercing Tool hire

Drilling and Boring for small pipes and conduits, including the NBN.
Installing house connections to the main services for water, gas, fiber Optic, telecommunication cables, electric cables and other small buried utilities.

The Trimmer is the ideal tool for all those Trimming tasks while also having the option of using the various bases for added cutting applications.
Variable speed control by dial
Shaft lock for easy bit change
Round base assembly for smooth and fast cutting with easy handling
Ergonomic body grip easy to grasp with one hand
Electronic control

Technical Description
Parameters Ride-ON Trowel
Drive Engine Petrol Engine
Engine Type Loncin LC2V78F(20hp)
Working Diameter 190 X 915 mm
Speed 120-140 rpm
Fuel Tank 15.5 Liter
Battery 12V/25A
Weight 258 Kg
Ride on helicopter hire

Features:
27 litre tank - the ideal machine for extracting potentially harmful dust particles
New ?Push & Go" manual filter cleaning system for extended operating times and filter service life
Easily converts from dust extraction to a powerful wet or dry industrial vacuum cleaner
Lock off filter bags are easily removed and replaced designed to stop harmful dust from escaping when removing or also availble plastic disposable liners ofr general dusts, PET washable filter cartridge bags
Automatic on/off system operates simultaneously as connected tool is switched on (tools up to 1200W)
Specifications:
Air Flow/Min: 3600 l/min
Air Pressure (Water Column): 230/23
Container Volume: 27L
Continuous Rating Input: 2400W, 1,200W for Vac & 1,200W for attached powertool
Net Weight: 10kg
Overall Length: 390x380x570mm
Power Supply Cord: 7.5m

Capacity (general) : 30 l
Capacity (dry) : 30 l
Capacity (wet) : 30 l
Water Level Indicator: No
Motor Stages: 1
HEPA Filter: No
Hard Water Filter: No
Cleaning Modes: Dry
Cordless design for high portability.
- Convenient for use with Makita cordless tools.
- Large 3L dust bag capacity.
- Variable switch provides High / Low air volume settings to suit your appliaction.
- Shoulder belt can be easily slung over your shoulder for added mobility.
- 2 functions in 1 machine convertible into a blower by attaching nozzle assembly.
- Electronic 2-Speed and Soft Start.
- Battery and charger sold separately.
Specifications

Voltage / Max. peak air flow
18V 3.0Ah or 1.3Ah / 3.4mÃ‚Â³/min
Max. sealed suction (water column)
5.5kPa (560mmH2O)
Recoverable capacity
Dust: 3.0L (0.8gal)
Dimensions (LxWxH)
273 x 195 x 226mm
Net Weight
2.2kg

Cyclonic vacuum cleaner hire.
Dust extractor hire.

Features:

2 Motors
Powerful 2300 Watt Motor
30
Features:
Two, 2400W bypass motors. Strong appliance with very powerful suction. An absolute must for vacuuming dusts, solid debris and liquids. It has been designed for large areas and lays claim to an excellent filter system.
G" category polyester felt pre-filter
"US-Hepa" post-filter for outlet air
Specifications:
Rated Voltage: 230 V
Frequency: Hz 50 / 60 IEC
power for single engine: 1200 W
Max power: 2400 W
Approx. vacuum rating: Kpa 24
Rated capacity: 80 L
Approx. weight: 31kg
Dimensions: 620 x 660x 875mm

Size
152mm
Type
Bench
Max. Opening
205mm
Overall Length (closed Jaws)
395mm
Overall Width
200mm
Overall Height
212mm
Weight (Nett)
32kg

Upright rammer hire
Wacker hire
Plate compactor hire

Description
Dimensions (l x w x h): 673mm x 343mm x 965mm
Shoe size (w x l): 280mm x 330mm
Weight: 66kg
Stroke: 80mm
Percussion rate: 700 blows/min
Travel speed: 9.8m/min
Compacted Area: 164m2/h
Engine Type: Air-cooled, 2-cycle, single cylinder Wacker Neuson WM 80, petrol engine
Displacement: 80cm3
Rated Power at Rated speed: 1.8kW (2.4hp) at 4400rpm
Power Rating Specification 80/1269/EEC,ISO3046-1
Fuel to oil ratio: 120:1
Fuel consumption: 1.2L/h
Tank capacity: 3L
Oil tank capacity: 0.7L

Two-Way Radios hire

MILWAUKEE 45MM TWIN BLADE WALL CHASER

Sturdy 1900W motor with large power reserves
Cutting width can easily be set with the new design stepless adjustment
Dust extraction connection
Ergonomic softgrip for comfortable use
Spindle lock
Unique Swing-Grip adjustable handle for optimum user comfort whatever the cutting application
Four rollers for extra stability and straighter cuts
Delivered with two 150 mm diamond discs

DST 10-CA hire
Product Specifications
Min. generator power 20 kVA
Rated voltage 400 V
Saw blade diameter - range 610mm - 890mm
Starting blade diameter 790mm
Remote control wireless
Weight - Drive 32kg
Dimensions (LxWxH)- Drive 365 x 400 x 350mm
A-weighted emission sound pressure level 114.5 dB (A)¹
IP protection class IP 65
Pin assignment 3P+PE

wall saw hire, electric wall saw hire, cut assist wall saw hire, track saw hire or auto feed wall saw hire

Resistant to heat
Mobile Waste Bin Specifications:
Volume litres: 660
Max Load kg: 265
Height x Width x Length mm: 1200 x 780 x 1260
Net Weight kg: 43
Technical Data:

Pump Type Centrifugal Aluminum Max Flow 130 l/min
Total Head 30 m
Max Suction Head 8 m Impeller Aluminum Soilds Clear Water Only, No Solids Engine: Honda 4 Cycle Type Honda GX25 4 stroke 1.5 HP Cooling System Air Cooled Starting System Recoil - Pull Start Only Fuel Specifications Fuel Effeciency Fuel Tank Capacity 0.55 Litres Fuel Unleaded Gasoline 4 Cycle No mixing of oil and gas Dimensions Specifications Dry weight 6.4kg Ends - Discharge
- Suction
1" M Npt
1" M Npt
Max Flow1003 l/min
Total Head32 m
Max Suction Head8
Clear Water OnlyNo Solids
-Suction3" M Npt
3" M Npt
Dry weight 29.2kg

BOC Smootharc 180
The Smootharc MIG 180 is an inverter-based machine thatâ€™s lightweight and can be used for welding steel and stainless steel. Simple to set up
TIG WELDER HIRE
MIG WELDER HIRE
Unimig Razorweld 250 Digital Inverter Welder Kit KUMJRDP250
Features:
MIG / TIG / MMA multi function inverter
Digital control power source
Digital MIG Torch enables adjustments to voltage and wire speed during welding
MIG Mode - Adjustable crater fill & post gas
MIG Mode - Adjustable inductance for optimum arc characteristics
TIG Mode - Adjustable down slope time & post gas
MIG/TIG 2T - 4T trigger function
Reversable Polarity for Gas/Gasless Welding
Geared Wire Drive
5Kg to 15Kg Spools
Spool Gun ready
Gas Solenoid for TIG welding eliminating manualvalve torches and minimizing gas loss.
VRD - Voltage Reduction Device
Specifications:
Power Supply / Phases (V-Ph) 240v - 1 +/- 15%
Duty Cycle @ 40Â°c as per AS/NZ60974-1 40% @ 250 Amps MIG
40% @ 224 Amps MMA
Output Current Range MIG 30A/15.5V - 250A/26.5V
Output Current Range MMA 10A/20.4V - 250A/33.0V
Rated Power MIG 10.8 KVA
I ieff MIG 26.6 Amps
MMA 28 0 Amps
Power factor 0.72
Protection Class IP21S
Insulation Class F
Dimensions Power Source (LxWxH) 585x280x440mm
Weight Power Source 35 Kg
Dimensions Trolley (LxWxH) 880x430x410mm
Includes:
UNI-MIG 250 Digital Multifunction Welding Inverter
DM26 Digital 4M Sure Grip MIG torch
4M ARC lead set
UNI-FLAME Twin Gauge Argon Regulator
2M Gas Hose

Features:
Latest IGBT inverter technology
MMA (stick electrode)
Hot start (improves electrode starting)
Arc Force (boosts current to prevent electrode extinguishing)
Excellent arc stability with all electrodes
DC TIG
Lift Arc ignition (prevents tungsten sticking during arc ignition)
Ultra smooth DC TIG welding current
Thermal overload protection
IP21S rating for environmental/safety protection
Generator compatible (recommend 6.0 KVA minimum)
Tolerant to variable power supplies
Fitted with and approved to use domestic 10 amp plug
Specifications:
Power Supply / Phases: 240V - 1 Â±15%V-Ph
Rated Input Power: 6KVA
Ieff:10amps
Rated Output: 130A/25.2V
Welding Current Range: 10~130A
No-Load Voltage: 70V
Duty Cycle @ 40ÂºC as per AS/NZ60974-1
20%@130Amps MMA
50%@130Amps TIG
Efficiency: 80%
Power Factor: 0.7
Protection Class: IP21S
Insulation Class: F
Size (L x W x H): 290 x 115 x 200
Weight: 4.9kg

Auto darkening welding mask
uto darkening welding mask
80 litres
Poly tray or metal

White Resin Chair
Plastic chair hire
Anti-slip rubber bottoms
Lightweight
Weight capacity of 95kg

Ideal for domestic and commercial use on acreage, parks and around farms by gardeners, hire companies, landscapers, groundskeepers and contractors. The C13 is very popular with orchard, olive and winery owners as well.
The Hansa C13 chips branches up to 90mm in diameter and features:
GX390 Honda petrol engine
Easy start
Heavy duty blades
Pneumatic wheels for easy maneuvering by hand
Solid-steel casing
Twin belt drive
Adjustable output chute
Similar noise output to a domestic mower
Minimal cleaning and maintenance required
The Hansa C13 easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.

Wood chipper hire / Garden Chipper hire / Mulcher hire /Shredder hire
16 x floating chipping hammers
Commercial grade 14HP KOHLER
Bowl for bushy branches
4 x 2 inch branch feed chute

Gorilla 390 x 1100mm 120kg Adjustable Height Work Platform With Connecting Brackets

QUICK SPECIFICATIONS
Brake Type:
Mechanical Front Axle Disc Brakes
Suspension:
Parabolic Spring
GTM:
2000kg
Tare:
300kg
Payload:
1700kg
Wheel Type:
New 8ply LT tire 13" steel Ford rim
Deck Width:
1100mm
Overall Length:
4000mm
SKU:
SW2000C
Weight:
300.000 KGS

Rated Power (KVA) 5.5
Range of Output Current 20-45amps
Duty Cycle 25%
Primary Input Voltage 240v single phase
Current Range 20-45amps
Max Cutting Thickness (mm) 16mm clean, 20mm severence
Dimensions (mm) 410x165x330
Protection Class IP21S
Insulation Class F
Weight 9.8000

It is an adjustable and purpose designed wallboard holder and lifter
Panel lifters give you the power of 2-3 men
This Telescopic Ceiling Support is easy to operate with just one hand and features a sensitive trigger for graduated leveling or lifting.
Pivoting and rotating feet
Easy to operate with just one hand
Sensitive trigger for graduated levelling or lifting

Drywall gun hire
Drive Shank 6.35mm (1/4") Hex
Net Weight 2.3kg
No Load Speed 4,000rpm
Overall Length 424mm
Specifications - Capacity - Collated Drywall Screw 4mm dia. x 25-41mm
Voltage 18V

Board trolley
Features
Sturdy tubular design with welded steel construction
Two fixed castors for better manuverability
Dismantles to fit in the boot of most cars
Reduces the chance of physical strain

SANDS WALLS AND CEILINGS
The swivel-mounted head adapts to every angle surface: you always
work in a comfortable position thatâ€™s easy on the operator.
A FINE FINISH
The patented sanding pads are cushioned to eliminate swirl marks.
REACHES EVERYWHERE
With the long neck
500 Ã— 408 x 1200mm

Wacker plate hire
Compactor hire

Makita SP6000JT - 240V 1300W 165mm Circular Plunge Cut Saw With 2x1400mm Guide Rail
Kit Includes:
1 x Makita SP6000K 1300W 165mm Plunge Cut Circular Saw.
2 x Makita 194368-5 1400mm Guide Rail - 1943685.
1 x Makita P-20177 - 2 Piece Rail Joiner Set.
1 x Makita 194385-5 - Saw Clamp Set For Guid Rail - 1943855.
1 x Makita P-67810 - Guide Rail Protective Bag(Holder) Blue.
1 x TCT saw blade.
1 x Hex wrench.
1 x Carry case.
Makita SP6000JT - 240V 1300W 165mm Circular Plunge Cut Saw
Features:
Powerful 1
Group-microphone systems designï¼ŒCan be expanded to 14 sets wireless microphone use
8"3 Audio road coaxial speakers
slot CD/MP3/SD/USB player
Built-in echo volume function and Intimate setting storage pockets
Dual electronic protection circuit design
AC/110Vï¼ŒAdd-ins DC/12Vï¼ŒDuplex power supplyï¼ŒBuilt-in /12V/7.2Ah chargeable battery
External signal connections-side seatï¼Œgood expandability

Amplifying host specification
Output Power 70W/4Î© MAX
Frequency Response 100Hz~15KHzÂ±3dB
Speaker settings 8" coaxial 3 audio road
T.H.D.(1KHz) <1.5%(1KHz)
Input Terminal (Ã˜6.3) MICÃ—2 Auxiliary InputÃ—1
Output Terminal ( Ã˜6.3) AuxiliaryÃ—1 External speakersÃ—1
CD Seat Slot CD/MP3/SD/USB
Antenna Built-in
Power Sluppy AC 110V/DC 12V
Dimension (WÃ—DÃ—Hmm) 285Ã—316Ã—520mm(With hand excluding parts bags)
Weigh (kg) 18.4kg
Appearance Material Wooden box / PVC Black surface
DC OUT DC 12V/1A (Maximum)

1 Man Earth Auger hire

A powerful and robust earth auger
Description
Combines power and control to give you the smoothest and quickest chisel action for any size project. It elevates the concept of reciprocating carving to a whole new level! A versatile tool for wood carvers; sculptors; tradesmen and DIYers. Creates precision joints; easy recesses and precise corners in minutes.

Heavy-Duty
Drill Capacity
32mm
Motor Power
2hp
Motor Voltage
240V
Overall Height
1710mm
Weight (Nett)
130kg

Bench drill hire
Pedestal drill hire

19 dollars 1 day
49 dollars per week
Acrow prop hire 2.72m

Maximum load capacity when closed (1.63m) is 3600kg. Extended (2.72m) is 2400kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
22 dollars 1 day
59 dollars per week
Acrow prop 3.5m
Maximum load capacity when closed (1.98m) is 3000kg. Extended (3.35m) is 1900kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
Acrow props hire 3.96m

Maximum load capacity when closed (2.59m) is 3500kg. Extended (3.96m) is 1400kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
Acrow prop hire 5.13m

Maximum load capacity when closed (3.28m) is 3100kg. Extended (5.13m) is 900kg.
Fully hot-dipped galvanised. The process of galvanising only take place after the welding and threading processes have been completed
Complete square-shaped end plates (with no semicircular cuts on the sides) to provide maximum stability when the prop is under load
Extra height of the prop nut engages more threads resulting in the prop to withstand heavier loads
Specially designed self cleaning unit attached to the prop nut that automatically cleans the prop's threads of any concrete
Racking hire
40 dollars each linear metre per week.
2100mm x 600mm

Binder Load Binder hire

Swivel Head Grab Hook
Ergonomically Designed
Safer
Ratchet hire
Webbing Width: 50mm
Strap Length: 9.15m
Working Load Limit (WLL): 1500kg
End Fitting: Double J Hook

The TC 238 is ideal for homeowners and landowners with larger gardens who need a durable and comfortable tractor with high manoeuvrability. It is an efficient garden tractor that offers excellent collection of grass clippings as well as leaves, giving tidy cutting results. The spacious, integrated collector is easily emptied from the driverâ€™s seat. Equipped with a powerful Husqvarna Endurance Series engine, including choke less start, as well as pedal-operated hydrostatic transmission and cast front axle for extra convenient and trouble-free operation.
Engine manufacturer
Briggs & Stratton
Power
14.9 kW
Transmission type
Hydrostatic
Cutting width
97 cm
Ride-on lawn mower hire
Rider hire
Engine manufacturer
Briggs & Stratton
Power
14.9 kW
Transmission type
Hydrostatic
Cutting width
107 cm

Floor cutter hire.
Roadsaw hire
Asphalt saw hire
Max. Blade Diameter: 450mm
Max. depth of cut: 165mm
Diamond blade charge according to the use

Anti Vibration rear handle. This Rotary Hammer is built for the heavy drilling tasks.
3 mode - Rotary Drilling / Chiselling / Drilling

SDS Max Combination Hammer hire
Features:
Perfect for drilling anchor fixing and holes in concrete and masonry from 12mm- 45mm in diameter with core drilling up to as much as 100mm
Chain drive boosts durability and efficiency along with an oil-filled gearbox that ensures 100% component lubrication as well as outstanding heat dissipation
Active Vibration Control, AVC, system has a floating rear handle plus damped side handle to decrease vibration
Ergonomically designed to be compact with a slim-line design that optimises control while offering user friendly access to tight spaces
Rotation-stop is ideal for medium to light demolition jobs
Innovative dust sealing protection stops dust from getting into the hammer mechanism which means extended service life and durability
Hammer mechanism reduces number of components and improves dampening to provide max impact energy, making it possible to drill into hardest concrete
High efficiency mechanism provides impact blows right to the bit without any losses through excessive vibration and rebound dampening reduces stress to the tool
Soft rubber grip handles help eliminate operator fatigue
Electronic variable impact energy-speed for complete control when using smaller bits and light material
Lock-on switch for better control in chipping mode
Electronic service and brush wear indicator tells you when brushes need to be replaced and when product needs to be serviced
Excellent power-to-weight ratio with 8 Joules of impact energy provided by a 6.8kg hammer
Durable yet lightweight magnesium housing
Specifications:
Power Input (W) 1250 Watts
Power Output (W) 615 Watts
Load Speed (RPM) 210-415 rpm
Blows per Minute (BPM) 1430-2840 bpm
Impact energy EPTA 05/2009 (J) 8 J
Tool Holder (type) SDS-Max
Max. Drilling Capacity Concrete (mm) 45 mm
Max. Drilling Capacity Breakthrough bit (mm) 65 mm
Max. Drilling Capacity Core bit (mm) 100 mm
Weight (kg) 6.8 kg
Length (mm) 477 mm
Height (mm) 245 mm
Width (mm) 104 mm
Hand/Arm Vibration 8.8 m/s2
Uncertainty K 1 (Vibration) 1.5 m/sÂ²
Hand/Arm Vibration Chisel 7.2 m/sÂ²
Uncertainty K 2 (Vibration) (dBA) 1.5 m/sÂ²
Sound Pressure (dBA) 92 dB(A)
Uncertainty K 1 Sound (dBA) 3 dB(A)
Accoustic Pressure (dBA) 103 dB(A)
Uncertainty K 2 Sound (dBA) 3 dB(A)

Features:
Aluminum Material
Function-Oriented Lifting System
Unique Anti-slip Chain
Scale Bar
Telescopic head
Quick release legs
Suitable for all lasers and levels.
CPI CPI505G Greenbeam Rotating Laser Level Kit - CPI505G
Includes:
Green Beam Rotary Laser
Receiver
Clamp
Remote Control
Wall Mount Clamp
Green Laser Glasses
Green Magnetic Laser Target
Sturdy Carry Case
Operating manual
Features:
Green Beam provides superior visibility in outdoor and indoor lighting conditions
Maximum utility for your mid-range exterior/interior layout projects
Fully Automatic
Horizontal and Vertical Applications
Self Leveling
Long Range
Waterproof
Shock proof
High Accuracy
Main applications:
General building and construction
Concreting
Formwork
Landscaping and Agriculture
Excavation and earthmoving
Civil work
Survey
Paving
Footings
Interior fit out
Tiling
Fabrication
Electrical set out
Specification:
Accuracy
Horizontal: Â±20"
Vertical: Â±20"
Self-leveling range: Â±5Â°
Working distance diameter: 500m (with detector)
Rotation speed: 0, 60, 120, 300, 600r.p.m
Scanning feature: 0Â°, 10Â°, 45Â°, 90Â°, 180Â°
Setting slope: Â±5Â°(dual axis)
Wave length: 532nm
Down Point Accuracy: Â±1mm/1.5m
Remote control distance: approx. 20m
Work Temperature: 0Â°C - 40Â°C
Power: DC 4.8-6V (NI-MH rechargeable)
Work time: approx 15hrs
Water-proof: IP 64
Dimensions (L x W x H): 135mm x 185mm x 175mm
Weight: 2.2kg

ROTARY TILLER
This heavy duty tiller turns the toughest ground into a beautiful garden bed or ready for sod and turf.
Width650mm / 26â€³
Weight66kg / 145lbs
Cutting Depth100mm / 4â€³
Fwd â€“ RevFingertip Control
Cultivator hire
Hydraulic hoe hire
Tiller attachment hire
Rotavator hire

Individually serial numbered
Scaffold chutes
8 dollars per day for each linear metre.
Rubbish tubes hire

3 dollars 1 day
9 dollars per week

Complies To Australian Standards: AS/NZ 1891.1:2007
Full Body Harness With Floating Shoulder And Leg Straps
Made From Bright And Durable Polyester Webbing
Fall Arrest With Frontal Attach Loops Linked To A Floating Rear Comfort Strap.

Sandblasting Hopper 19 Litre
Approx. Inside Cabinet Size (LxWxH)
Ã˜270 x 520mm approx.
Recommended Free Air Delivery
254L/min. @ 100psi
Floor Space with Door/Lid Open (L x W x H)
370 x 370 x 705mm
Weight (Nett)
6.5kg

Air compressor
Specifications:
Tank: 70L
Power: 1.1kw x 2
Noise: 81 (dB)
Intake Volume: 400L/min
Cmf: 14-15
W.P: 8Bar
Net Weight: 50kg
Voltage: 240V/50Hz
Size: 83 x 38 x 78 cm

Approx. Inside Cabinet Size (LxWxH)
590 x 500 x 300-360mm
Recommended Free Air Delivery
254L/min. @ 100psi
Floor Space with Door/Lid Open (L x W x H)
700 x 500 x 930mm
Weight (Nett)
19kg

Aluminium mobile scaffold hire 8.6m working height 99 dollars per day.
3 days minimum charge

Aluminium mobile scaffold hire 3.9m working height 99 dollars per day.
2 days minimum charge

Aluminium mobile scaffold hire 4.7m working height 39 dollars per day.
2 days minimum charge

Aluminium mobile scaffold hire 5.76m working height 99 dollars per day.
2 days minimum charge

Aluminium mobile scaffold hire 6m working height 59 dollars per day.
3 days minimum charge

Aluminium scaffold hire 7m.
2 days minimum charge

Aluminium mobile scaffold hire 8.6m working height 99 dollars per day.
3 days minimum charge

Aluminium Telescoping Plank hire 3.0m to 4.5m

Max Working Height 7790 mm
Max Platform Height 5790 mm
Max Platform Weight Capacity 272 kg
Platform Length 1630 mm
Platform Width 740 mm

New & Used Heavy Equipment http://www.ritchiespecs.com/specification?type=lifting+%25&category=Scissor+Lift&make=Genie&model=GS1930&modelid=108586#ixzz4C1pATSzB

Grouts mixer
Screeds mixer
Crumbed Rubber mixer

Mixer for tiling screed

Metal garden shed hire 1.52 x 0.78 x 1.95m
"
Dimension
Dimension : 510 x 290 x 425 (mm)
Dry Weight : 21 kg
Features:
Maximum Output : 2000VA
Rated AC Output : 1600VA
DC Output (Generator /Charger) : 12V-8.3A
Battery Charging : Yes
Frequency Meter : No
Volt Meter : No
Generator Type : Mulitpole field rotation type (inverter)
Rated Voltage : 240 (V)
Rated Frequency : 50 (Hz)
Fuel Gauge : No
AC Circuit Breaker : Yes
DC Circuit Break : Yes
Auto Throttle : Eco-throttle
Auto Choke : No
Large Capacity Air Cleaner : Yes
Large Capacity Fuel Tank : Yes
Large Capacity Muffler : Yes
Pilot Lamp : Yes
Air Cleaner : Dual element type
CONDITION *With eco-throttle switched on at 1/4 output
Peace of Mind:
Engine is protected via low oil alert system.
Up to 15 hours of continuous operation on a full fuel tank.
"
Finished in bright yellow
Single phase carpet dryer

Lightlift 14.72 IIIS is an innovative, compact and light tracked aerial platform.
Created to simplify as much as possible the use of the machine by the operator, making life easier for the hirer.
Weighting only 1380 kg it can be transported with a car driving licence.

Capacity platform 120kg - 200kg
Max. Working height 13,90m (120kg) - 12,25m (200kg)
Max. Horizontal working outreach 6,76m (120kg) - 5,92m (200kg)
Transport length 4,01m
Transport length without basket 3,79m
Standard basket dimensions 1335x690xh.1100m
Maximum stabilisation angle 10Â°
Max slope allowedin travel mode 16Â°/28,7%
Total weight 1398kg - 1490kg Lithium-ion
Petrol engine HONDA iGX270 - HONDA iGX390
Diesel_engine HATZ 1B30
Electric motor 2,2kw-230V-50Hz / 2,2kw-110V-50Hz
Lithium-ion powered 4,8 KWh
Max. Travel speed - petrol version 1,3km/h - 2,6km/h (optional)
Max. Travel speed - diesel version 1,5km/h - 3km/h (optional)
Max. Travel speed - lithium-ion version 1,1km/h - 2,1km/h (optional)
Max ground pressure on stabilizer 1200 daN - 1,7daN/cm2
Stabilization area 2907x2866mm
Swager 600mm Hand Swaging Tool
600 mm (24 inch) Swager tool with Cutter.
Heavy Duty Heat Treated alloy jaws
from 3.2mm up to 8mm wire swages / ferrules
Steel Wire Rope Crimping Tool Crimper

Fitted with functions like a powerful heating element
Ladder Length 3.6 metres

Load Weight Capacity 150kg

Material
Plastic Housing / Rubber Grip (IP 54 Protection)
Colour
Blue
Product Dimensions (mm)
W:85 H:200 L:32
Package Dimensions (mm)
W:165 H:260 L:75
Audio Alert
Yes
Batteries Included
Yes
Number of Batteries Required
1
Battery Type Required
9 V 6LR61
Detects Metal
Yes
Detects Voltage
Yes
Digital Display
Yes
Maximum Wall Thickness (mm)
120

2440 x 762 x 737mm Folding Trestle Table hire
Folds in half for easy transportation and storage
Convenient lightweight design
Durable and waterproof
Stain resistant and easy to clean

Marquee 183 x 76 x 73cm Bi-Fold hire

Solid steel frame construction
Folds in half for easy storage and transport
Patented locking mechanism secures into once piece

The Table Saw is the perfect addition to any home workshop. Featuring a powerful 1800W motor and a 254 mm (10") Blade, the unit is capable of most domestic table top sawing applications.

The soft start feature coupled with a premium blade guard enhances user safety during operation and a dust port on the side of the unit can be coupled with any suitable extraction unit.

The unit includes a folding stand that positions the saw at an optimal waist height for easier use and is equipped with wheels, making movement around the workshop quicker and easier.

An extension table, ripping fence, mitre gauge, push stick and 48 tooth T/Carbide blade are also included.
1800W motor
254mm/10" blade size
Electronic soft start for user safety
Extension table for larger applications
Easy height and bevel adjustment

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty (205GSM - 240GSM).
Price for 1 week hire.
Contact us for long term rental discount.

POLY tarp hire.
Heavy duty.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

PVC tarp hire 650gsm.
Price for 1 week hire.
Contact us for long term rental discount.

Planer hire
Maximum capacity of 318 mm wide & 153 mm High
Easy height adjustment winder
8 m per minute planing speed

Sigma 75cm Tile Cutter hire

29 dollars 1 day
99 dollars per week

Galvanized tilt trailer hire 7x4

1900kg payload

The 7 Series diesel loader incorporates features that offer you an edge in power, speed, durability, ease of use, economy and safety.
Managing a load of up to 260kg and a breakout force of up to 600kg. The 7 Series comes standard with tracks for increased stability on uneven surfaces.
Loader Model: DT725
Engine Model: Kubota D902 Diesel Ground Clearance 195mm
Power: 18.5kW Cooling: Water Cooled
Lift Capacity: 260kg Travel Speed 7.7km/h
Fuel Capacity: 49L System Pressure: 220BAR
Operating Weight: 1025kg Width: 1040mm
Bucket Max Rollback: 40Â°
posi loader hire
track loader hire

TIGHT ACCESS HYDRAULIC TIPPER

700MM WIDE TRACKED DUMPER

Galvanized trailer hire 7x4

Trencher hire 100mm x 800mm
Mini loader 159 dollars per day.

The trenchless NO DIG MOLE eliminating or greatly reducing all re-instatement costs involved in the installation of underground electric cables, telecommunication cables (Fiber Optic), conduits and small pipes.

Moling Equipment hire.
Trenchless tool hire
Pneumatic Earth Piercing Tool hire

Drilling and Boring for small pipes and conduits, including the NBN.
Installing house connections to the main services for water, gas, fiber Optic, telecommunication cables, electric cables and other small buried utilities.

The Trimmer is the ideal tool for all those Trimming tasks while also having the option of using the various bases for added cutting applications.
Variable speed control by dial
Shaft lock for easy bit change
Round base assembly for smooth and fast cutting with easy handling
Ergonomic body grip easy to grasp with one hand
Electronic control

Technical Description
Parameters Ride-ON Trowel
Drive Engine Petrol Engine
Engine Type Loncin LC2V78F(20hp)
Working Diameter 190 X 915 mm
Speed 120-140 rpm
Fuel Tank 15.5 Liter
Battery 12V/25A
Weight 258 Kg
Ride on helicopter hire

Features:
27 litre tank - the ideal machine for extracting potentially harmful dust particles
New ?Push & Go" manual filter cleaning system for extended operating times and filter service life
Easily converts from dust extraction to a powerful wet or dry industrial vacuum cleaner
Lock off filter bags are easily removed and replaced designed to stop harmful dust from escaping when removing or also availble plastic disposable liners ofr general dusts, PET washable filter cartridge bags
Automatic on/off system operates simultaneously as connected tool is switched on (tools up to 1200W)
Specifications:
Air Flow/Min: 3600 l/min
Air Pressure (Water Column): 230/23
Container Volume: 27L
Continuous Rating Input: 2400W, 1,200W for Vac & 1,200W for attached powertool
Net Weight: 10kg
Overall Length: 390x380x570mm
Power Supply Cord: 7.5m

Capacity (general) : 30 l
Capacity (dry) : 30 l
Capacity (wet) : 30 l
Water Level Indicator: No
Motor Stages: 1
HEPA Filter: No
Hard Water Filter: No
Cleaning Modes: Dry
Cordless design for high portability.
- Convenient for use with Makita cordless tools.
- Large 3L dust bag capacity.
- Variable switch provides High / Low air volume settings to suit your appliaction.
- Shoulder belt can be easily slung over your shoulder for added mobility.
- 2 functions in 1 machine convertible into a blower by attaching nozzle assembly.
- Electronic 2-Speed and Soft Start.
- Battery and charger sold separately.
Specifications

Voltage / Max. peak air flow
18V 3.0Ah or 1.3Ah / 3.4mÃ‚Â³/min
Max. sealed suction (water column)
5.5kPa (560mmH2O)
Recoverable capacity
Dust: 3.0L (0.8gal)
Dimensions (LxWxH)
273 x 195 x 226mm
Net Weight
2.2kg

Cyclonic vacuum cleaner hire.
Dust extractor hire.

Features:

2 Motors
Powerful 2300 Watt Motor
30
Features:
Two, 2400W bypass motors. Strong appliance with very powerful suction. An absolute must for vacuuming dusts, solid debris and liquids. It has been designed for large areas and lays claim to an excellent filter system.
G" category polyester felt pre-filter
"US-Hepa" post-filter for outlet air
Specifications:
Rated Voltage: 230 V
Frequency: Hz 50 / 60 IEC
power for single engine: 1200 W
Max power: 2400 W
Approx. vacuum rating: Kpa 24
Rated capacity: 80 L
Approx. weight: 31kg
Dimensions: 620 x 660x 875mm

Size
152mm
Type
Bench
Max. Opening
205mm
Overall Length (closed Jaws)
395mm
Overall Width
200mm
Overall Height
212mm
Weight (Nett)
32kg

Upright rammer hire
Wacker hire
Plate compactor hire

Description
Dimensions (l x w x h): 673mm x 343mm x 965mm
Shoe size (w x l): 280mm x 330mm
Weight: 66kg
Stroke: 80mm
Percussion rate: 700 blows/min
Travel speed: 9.8m/min
Compacted Area: 164m2/h
Engine Type: Air-cooled, 2-cycle, single cylinder Wacker Neuson WM 80, petrol engine
Displacement: 80cm3
Rated Power at Rated speed: 1.8kW (2.4hp) at 4400rpm
Power Rating Specification 80/1269/EEC,ISO3046-1
Fuel to oil ratio: 120:1
Fuel consumption: 1.2L/h
Tank capacity: 3L
Oil tank capacity: 0.7L

Two-Way Radios hire

MILWAUKEE 45MM TWIN BLADE WALL CHASER

Sturdy 1900W motor with large power reserves
Cutting width can easily be set with the new design stepless adjustment
Dust extraction connection
Ergonomic softgrip for comfortable use
Spindle lock
Unique Swing-Grip adjustable handle for optimum user comfort whatever the cutting application
Four rollers for extra stability and straighter cuts
Delivered with two 150 mm diamond discs

DST 10-CA hire
Product Specifications
Min. generator power 20 kVA
Rated voltage 400 V
Saw blade diameter - range 610mm - 890mm
Starting blade diameter 790mm
Remote control wireless
Weight - Drive 32kg
Dimensions (LxWxH)- Drive 365 x 400 x 350mm
A-weighted emission sound pressure level 114.5 dB (A)¹
IP protection class IP 65
Pin assignment 3P+PE

wall saw hire, electric wall saw hire, cut assist wall saw hire, track saw hire or auto feed wall saw hire

Resistant to heat
Mobile Waste Bin Specifications:
Volume litres: 660
Max Load kg: 265
Height x Width x Length mm: 1200 x 780 x 1260
Net Weight kg: 43
Technical Data:

Pump Type Centrifugal Aluminum Max Flow 130 l/min
Total Head 30 m
Max Suction Head 8 m Impeller Aluminum Soilds Clear Water Only, No Solids Engine: Honda 4 Cycle Type Honda GX25 4 stroke 1.5 HP Cooling System Air Cooled Starting System Recoil - Pull Start Only Fuel Specifications Fuel Effeciency Fuel Tank Capacity 0.55 Litres Fuel Unleaded Gasoline 4 Cycle No mixing of oil and gas Dimensions Specifications Dry weight 6.4kg Ends - Discharge
- Suction
1" M Npt
1" M Npt
Max Flow1003 l/min
Total Head32 m
Max Suction Head8
Clear Water OnlyNo Solids
-Suction3" M Npt
3" M Npt
Dry weight 29.2kg

BOC Smootharc 180
The Smootharc MIG 180 is an inverter-based machine thatâ€™s lightweight and can be used for welding steel and stainless steel. Simple to set up
TIG WELDER HIRE
MIG WELDER HIRE
Unimig Razorweld 250 Digital Inverter Welder Kit KUMJRDP250
Features:
MIG / TIG / MMA multi function inverter
Digital control power source
Digital MIG Torch enables adjustments to voltage and wire speed during welding
MIG Mode - Adjustable crater fill & post gas
MIG Mode - Adjustable inductance for optimum arc characteristics
TIG Mode - Adjustable down slope time & post gas
MIG/TIG 2T - 4T trigger function
Reversable Polarity for Gas/Gasless Welding
Geared Wire Drive
5Kg to 15Kg Spools
Spool Gun ready
Gas Solenoid for TIG welding eliminating manualvalve torches and minimizing gas loss.
VRD - Voltage Reduction Device
Specifications:
Power Supply / Phases (V-Ph) 240v - 1 +/- 15%
Duty Cycle @ 40Â°c as per AS/NZ60974-1 40% @ 250 Amps MIG
40% @ 224 Amps MMA
Output Current Range MIG 30A/15.5V - 250A/26.5V
Output Current Range MMA 10A/20.4V - 250A/33.0V
Rated Power MIG 10.8 KVA
I ieff MIG 26.6 Amps
MMA 28 0 Amps
Power factor 0.72
Protection Class IP21S
Insulation Class F
Dimensions Power Source (LxWxH) 585x280x440mm
Weight Power Source 35 Kg
Dimensions Trolley (LxWxH) 880x430x410mm
Includes:
UNI-MIG 250 Digital Multifunction Welding Inverter
DM26 Digital 4M Sure Grip MIG torch
4M ARC lead set
UNI-FLAME Twin Gauge Argon Regulator
2M Gas Hose

Features:
Latest IGBT inverter technology
MMA (stick electrode)
Hot start (improves electrode starting)
Arc Force (boosts current to prevent electrode extinguishing)
Excellent arc stability with all electrodes
DC TIG
Lift Arc ignition (prevents tungsten sticking during arc ignition)
Ultra smooth DC TIG welding current
Thermal overload protection
IP21S rating for environmental/safety protection
Generator compatible (recommend 6.0 KVA minimum)
Tolerant to variable power supplies
Fitted with and approved to use domestic 10 amp plug
Specifications:
Power Supply / Phases: 240V - 1 Â±15%V-Ph
Rated Input Power: 6KVA
Ieff:10amps
Rated Output: 130A/25.2V
Welding Current Range: 10~130A
No-Load Voltage: 70V
Duty Cycle @ 40ÂºC as per AS/NZ60974-1
20%@130Amps MMA
50%@130Amps TIG
Efficiency: 80%
Power Factor: 0.7
Protection Class: IP21S
Insulation Class: F
Size (L x W x H): 290 x 115 x 200
Weight: 4.9kg

Auto darkening welding mask
uto darkening welding mask
80 litres
Poly tray or metal

White Resin Chair
Plastic chair hire
Anti-slip rubber bottoms
Lightweight
Weight capacity of 95kg

Ideal for domestic and commercial use on acreage, parks and around farms by gardeners, hire companies, landscapers, groundskeepers and contractors. The C13 is very popular with orchard, olive and winery owners as well.
The Hansa C13 chips branches up to 90mm in diameter and features:
GX390 Honda petrol engine
Easy start
Heavy duty blades
Pneumatic wheels for easy maneuvering by hand
Solid-steel casing
Twin belt drive
Adjustable output chute
Similar noise output to a domestic mower
Minimal cleaning and maintenance required
The Hansa C13 easily mulches prunings, dropped branches, palm fronds, leaves, bark, paper, cardboard, hay, dried manure and kitchen waste.

Wood chipper hire / Garden Chipper hire / Mulcher hire /Shredder hire
16 x floating chipping hammers
Commercial grade 14HP KOHLER
Bowl for bushy branches
4 x 2 inch branch feed chute

Gorilla 390 x 1100mm 120kg Adjustable Height Work Platform With Connecting Brackets

Posted by Unknown at 3:17 AM No comments:
Email This BlogThis!Share to X Share to Facebook Share to Pinterest

Newer Posts Older Posts Home

Subscribe to: Comments (Atom)

Displacement	24.5 mL
Fuel Tank	0.52 L
Maximum Air Volume	8.91 m³/min
The velocity of the wind	316 cu.ft/min
Without Blower Pipes	64.6 m/s
Overall Length	368 mm (14")
Net Weight	4.4 kg

Vibrations front handle	3,9/3,4 m/sÂ²
Vibrations rear handle	4,2/4,8 m/sÂ²
Sound pressure level at operators ear	104 dB(A)
Sound power level, guaranteed (LWA)	115 dB(A)

Blade diameter	350/400 mm
Max cutting depth	125/145 mm
Combined bushing diameter	20/25,4 mm

Model Number	21C-65M3333
Engine	208cc Rover engine
Handle	Loop & bail for ease of use
Tilling Width	41cm (16")
Tines	25cm (10") counter rotating
Tine Shield	43cm (17")
Tyres	33cm (13")

Bevel Capacity	0-45 degrees
Blade Diameter	85mm
Max Cutting Capacities - at 0 degrees	25.5mm
Max Cutting Capacities - at 45 degrees	16.5mm
Net Weight	1.7kg
No Load Speed	1,400rpm
Overall Length	300mm
Tank Capacity	500mL
Voltage	10.8V

Hydraulic Pumps	2 Pumps
Pump Sizes	11 & 3cc
Relief Pressure (Aux)	3200psi (206bar)
Hydraulic Output	47 L/m
Max Travel Speed	7km/h
Rated Lift Capacity	275kg WLL 550kg MLL
Wheel Motors	4
Aux Hydraulic Outlets	1

A.	Overall Width	850-1050mm
B.	Overall Length	1565mm
C.	Overall Height	1200mm
D.	Max operating height 4in1	2080mm
E.	Turning Raduis with 4in1 Bucket	1300mm
F.	Angle of Departure	20Âº
G.	Wheel Base	732mm
H.	Ground Clearance	135-170mm
I.	Dump Height Std Bucket	1240mm
J.	Dump Height 4in1 Bucket	1750mm
K.	Reach Fully Raised 4in1 Bucket	600mm
L.	Height to Hinge Pin	1680mm
M.	Machine width 4in1 bucket	1050mm
	Hydraulic Reservoir Capacity	60L
	Machine Mass	722kg approx. \| 860kg approx.

Max Working Height (m)	Min. Load Height (m)	Width-stradle Min (m)	Capacity Max (kg)
3.5	0.15	0.75	350

Engine Model	Yanmar 3TNV76
Net Power	13.2 kW
Displacement	1116.0 cm3
Gross Power (ISO 14396)	17.9 kW
Rated Net Power @ 2,200 rpm (ISO 9249)	13.2 kW

Operating Weight	1728.0 kg
Operating Weight with Cab	1720.0 kg
Operating Weight with Cab and Extending Undercarriage	1845.0 kg
Operating Weight with Canopy	1610.0 kg
Operating Weight with Canopy and Extending Undercarriage	1735.0 kg

Gradeability	30Â°/58%
Travel Speed	2.8 km/h/5.6 km/h (1.74 mph/3.48 mph)

Operating Pressure - Equipment	200.0 bar
Operating Pressure - Travel	200.0 bar
Operating Pressure - Swing	125.0 bar
Auxiliary Circuits - Primary	30 L/min at 170 bar (8 gal/min at 2,465 psi)
Auxiliary Circuits - Secondary	17 L/min at 200 bar (4.5 gal/min at 2,900 psi)
Maximum Bucket Force	18.8 kN
Maximum Stick Force - Long Stick	9.8 kN
Maximum Stick Force - Standard Stick	11.2 kN
Pump Flow @ 2,200 rpm	6.4 L/min

Width	990.0 mm
Height	230.0 mm
Dig Depth - Standard Blade	317.0 mm
Lift Height - Standard Blade	197.0 mm

Boom Swing Angle (LH)	77Â°/64Â°
Boom Swing Angle (RH)	48.0 Degrees
Height	2290.0 mm
Length of Undercarriage (Extending)	1600.0 mm
Length of Undercarriage (Fixed)	1445.0 mm
Maximum Boom Offset (LH)	360.0 mm
Maximum Boom Offset (RH)	520.0 mm
Maximum Dig Height	3485.0 mm
Maximum Digging Depth	2200.0 mm
Maximum Dozer Dig Depth	320.0 mm
Maximum Dozer Lift Height	200.0 mm
Maximum Dump Height	2500.0 mm
Maximum Reach at Ground Level	3700.0 mm
Maximum Vertical Dig Depth	1430.0 mm
Tail Swing Radius	1170.0 mm
Transport Length (Arm Lowered)	3855.0 mm
Undercarriage Width (Extended)	1300.0 mm
Undercarriage Width (Retracted)	990.0 mm
Width	990.0 mm

Machine Overhang	495.0 mm
Stick Length - Long	1180.0 mm
Stick Length - Standard	980.0 mm

Capacity	181kg
Fork Height Range	90 - 2500mm
Fork Overall Width	630mm
Fork Length	570mm
Dimensions	850 x 650 x 2500mm
Weight	60kg

Voltage	18V
Battery	M18â„¢ REDLITHIUMâ„¢ XC4.0
Charger	M18â„¢ and M12â„¢ Multi-Voltage Charger
Nut-Busting Torque	1,200 ft-lbs
LED Light	Yes
Electric Brake	Yes
Switch Type	Variable Speed Trigger
Anvil Size and Type	3/4" Square - Friction Ring w/ Thru Hole
Torque	375 ft-lbs (Mode 1) and 750 ft-lbs (Mode 2)

Type:	Trucks
Sub Type:	Tipper
Year:	2009
Category:	Rigid
Power - kW:	114
Drive:	4x2
GVM - kg:	6,500

Loader Model:	DW625
Engine Model:	Kubota D902 Diesel	Ground Clearance	185mm
Power:	17.5kW	Cooling:	Water Cooled
Life Capacity:	250kg	Travel Speed	7.5km/h
Fuel Capacity:	45L	System Pressure:	220BAR
Operating Weight:	972kg	Width:	1030mm

Laser functionality	Square, Level, Align, Plumb
Accuracy	Â±2 mm at 10 m
Max. operating distance	10 m (Lines), 50 m (Lines, with receiver)
Self-levelling range at room temperature	Â±3 Â°
Laser line width at 5m distance	< 2 mm
Laser class	< 1 mW, 635 nm, Class 2 (IEC 60825-1:2008), Class II (FDA CFR 21 art. 1040)
IP protection class	IP 54 (IEC 529)
Battery type	4 x 1.5 V (AA)
Weight with batteries	990 g
Dimensions (LxWxH)	124 x 124 x 187 mm
Automatic switch-off	Yes
Tripod thread diameter	1/4 in, 5/8 in
Vertical side fan angle	240 Â°
Plumb type	Plumbing and additional horizontal and vertical alignment
Horizontal fan angle	180 Â°

Wednesday, November 16, 2016

Sydney Tools Hire

Saturday, November 12, 2016

Top Hire 24/11 Davies Road, Padstow

PNEUMATIC RATCHET HIRE

Application

Compression

Drivetrain

carpet dryer hire

Floor Grinder / Edge Grinder FGE 27

Technical Details

Design

Drive

Dimensions & Weight

Husqvarna K 970

Applications:

Nibbler 1.6mm 18v

Features:

ALL-ROUNDER

PERFORMANCE

DIMENSIONS

Features

1.8-3.3m 120kg Dual Purpose Aluminium Ladder

OVERVIEW

ENGINE

WEIGHTS

TRAVEL SYSTEM

HYDRAULIC SYSTEM

BLADE

SERVICE REFILL CAPACITIES

DIMENSIONS (APPROXIMATE) - STANDARD STICK

DIMENSIONS (APPROXIMATE) - LONG STICK

OPERATING SPECIFICATIONS

COMPACT DIMENSIONS

EXTENDING UNDERCARRIAGE AND BLADE

FOLDABLE SAFETY FRAME

3.3 - 5.8m 150kg Aluminium Extension Ladder

8KVA 13HP Honda Powered Petrol Generator With Earth Leakage & Wheel Kit

NO LADDER REQUIRED

Hand Trolley, Skate Trolley hire, Wooden Skate Dolly hire, Pallet Dolly hire, Furniture Dolly hire

20 METRES Retractable Inertia Reel Self Retracting Lifeline.

Fall Arrest reel hire

ISUZU NPR 300 TIPPER

Garden Roller hire

Features

Portable tent hire

Gazebo hire 3x3metres

305mm Slide Compound Mitre Saw

Saw stand available for 5 dollars per day.

Detector hire, rebar detector hire, ferroscan hire, concrete scanner hire

Specifications:

Technical Data

Dumpy hire

Pallet Truck hire2000/2500kg Capacity

QUICK SPECIFICATIONS

Makita SP6000JT - 240V 1300W 165mm Circular Plunge Cut Saw With 2x1400mm Guide Rail

Kit Includes:

Makita SP6000JT - 240V 1300W 165mm Circular Plunge Cut Saw

Features:

1 Man Earth Auger hire

Description

Racking hire

40 dollars each linear metre per week.

2100mm x 600mm

SDS Max Combination Hammer hire

Features:

Specifications:

CPI CPI505G Greenbeam Rotating Laser Level Kit - CPI505G

ROTARY TILLER

2440 x 762 x 737mm Folding Trestle Table hire

Marquee 183 x 76 x 73cm Bi-Fold hire

Two-Way Radios hire

MILWAUKEE 45MM TWIN BLADE WALL CHASER

DST 10-CA hire

Product Specifications

wall saw hire, electric wall saw hire, cut assist wall saw hire, track saw hire or auto feed wall saw hire

Features:

Specifications:

Includes:

White Resin Chair

Pallet Truck hire
2000/2500kg Capacity

Capacity	Load Wheels	Wheel Size (mm)	Skate Size (mm)	Weight (kg)
6T	6	75	395 x 330 x 101	13.8

Capacity	Load Wheels	Wheel Size	Skate Size	Weight
10T	14	24 x 84mm	267 x 146 x 133mm	17kg

Cartridge type	.27 calibre short, 6.8/11 M10
Automatic piston return	Yes
Noise (power) level: LWA, 1s	110 dB (A)¹
Weight	4.62 kg
Dimensions (LxWxH)	425 x 72 x 180 mm

Cartridge type	.27 calibre short, 6.8/11 M10
Power (max.)	325 J
Collated	Yes
Fastener intake	10 nails
Fastener length range	14 - 72 mm
Automatic piston return	Yes
Noise (power) level: LWA, 1s	105 dB (A)¹
Weight	3.57 kg
Weight according to EPTA Procedure 01/2003	3.6 kg
Dimensions (LxWxH)	467 x 72 x 180 mm

SPECIFICATIONS
Length	10-1/2" (266.7mm)
Width	5-1/4" (133.4mm)
Height	12-7/8" (327.0mm)
Weight	5.8 lb (2.63 kg)
Magazine Capacity	225-350 Nails
Operating Pressure	70 - 120 PSI
Thread Fitting Type	1/4" NPT
Vibration / Uncertainty	2.75 / 1.375 m/sÂ²
Power type	Pneumatic
Noise	LPA 1sd 92.90 \| LWA 1sd 98.80 \| LPA 1s, 1m 85.80
Series Fasteners	Fastener Length 1-1/4" to 2-1/2" (32 - 65mm)
Shank Diameter	.084" (2.1mm)

Capacity:	2000 or 2500kg
Length of Forks:	1150mm
Width over Forks:	540
Steer Wheels:	Nylon
Load Wheels:	Single Nylon

Capacity (Kg)	500kg
Fork Height Range (mm)	50- 1930mm
Weight	190kg
Fork Overall Width (mm)	620mm
Fork Length (mm)	760mm
Dimensions (mm)	1180 x 810 x 2350mm

Rated Power (KVA)	5.5
Range of Output Current	20-45amps
Duty Cycle	25%
Primary Input Voltage	240v single phase
Current Range	20-45amps
Max Cutting Thickness (mm)	16mm clean, 20mm severence
Dimensions (mm)	410x165x330
Protection Class	IP21S
Insulation Class	F
Weight	9.8000

Drive Shank	6.35mm (1/4") Hex
Net Weight	2.3kg
No Load Speed	4,000rpm
Overall Length	424mm
Specifications - Capacity - Collated Drywall Screw	4mm dia. x 25-41mm
Voltage	18V

Amplifying host specification
Output Power	70W/4Î© MAX
Frequency Response	100Hz~15KHzÂ±3dB
Speaker settings	8" coaxial 3 audio road
T.H.D.(1KHz)	<1.5%(1KHz)
Input Terminal	(Ã˜6.3) MICÃ—2 Auxiliary InputÃ—1
Output Terminal	( Ã˜6.3) AuxiliaryÃ—1 External speakersÃ—1
CD Seat	Slot CD/MP3/SD/USB
Antenna	Built-in
Power Sluppy	AC 110V/DC 12V
Dimension (WÃ—DÃ—Hmm)	285Ã—316Ã—520mm(With hand excluding parts bags)
Weigh (kg)	18.4kg
Appearance Material	Wooden box / PVC Black surface
DC OUT	DC 12V/1A (Maximum)